[Sat Sep 24 00:28:19 2011] Detection parameters:
  Position = (162.7, 679.6) = 14 22 53.31 53 30 25.8
  Extent = 0.9" x 0.7", rotation angle = 40 degrees
  Source counts = 15.9 +/- 4.1
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Sat Sep 24 00:28:20 2011] Off-axis axis estimate = 5.19'
[Sat Sep 24 00:29:39 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:29:39 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Sat Sep 24 00:29:39 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Sat Sep 24 00:29:39 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.26"
[Sat Sep 24 00:29:40 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10.ximg exists
[Sat Sep 24 00:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10.csv
[Sat Sep 24 00:29:41 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Sep 24 00:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10.csv
[Sat Sep 24 00:29:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06211_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:29:41 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Sep 24 00:29:41 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Sep 24 00:29:41 2011] Fit fullrun_ccd3_acisf06211_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Sep 24 00:29:52 2011] Spatial fit model total counts = 22.568100, observed total counts = 23.000000
[Sat Sep 24 00:29:52 2011] Offset between fit and detection position for source 9 = 0.378301 pixels
[Sat Sep 24 00:29:52 2011] 22.346472 total counts/ 0.300172 bgd. counts: snr = 40.239319
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.378301 pixels
  Position = (163.1, 679.6) = 14 22 53.32 53 30 25.6
  Extent = 1.5 (1.1-2.1)", rotation angle = 0
  Source counts = 22.0 +/- 4.7
  Background counts = 0.3
  Rate = 0.0006 +/- 0.0001
[Sat Sep 24 00:29:52 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 00:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 00:29:52 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 00:29:52 2011] Source does appear to be extended
[Sat Sep 24 00:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:30:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:30:29 2011] Initial guess for spatial extent in simple fitting = 1.46"
[Sat Sep 24 00:30:29 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Sat Sep 24 00:30:29 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.46"
[Sat Sep 24 00:30:31 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10.ximg exists
[Sat Sep 24 00:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10.csv
[Sat Sep 24 00:30:31 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Sep 24 00:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10.csv
[Sat Sep 24 00:30:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06211_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:30:31 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep 24 00:30:31 2011] fullrun_ccd3_acisf06211_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep 24 00:30:31 2011] Fit fullrun_ccd3_acisf06211_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Sep 24 00:30:46 2011] Spatial fit model total counts = 24.010300, observed total counts = 24.000000
[Sat Sep 24 00:30:46 2011] Offset between fit and detection position for source 9 = 0.207769 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.207769 pixels
  Position = (162.9, 679.7) = 14 22 53.33 53 30 25.6
  Extent = 1.5 (0.9-2.0)", rotation angle = 0
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat Sep 24 00:30:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 00:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 00:30:46 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 00:30:46 2011] Source does appear to be extended
[Sat Sep 24 00:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:33:41 2011] Not overwriting source region fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.reg
[Sat Sep 24 00:33:41 2011] Extracting stamp from image fullrun_ccd3_acisf06211_pi14-548_cl_sm2.00.img.gz, (93, 610) - (233, 749)
[Sat Sep 24 00:33:41 2011] Writing fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9.gif
[Sat Sep 24 00:34:27 2011] ../../acisf06211/products/events/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.evt and ../../acisf06211/products/events/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat Sep 24 00:34:27 2011] Size of ../../acisf06211/products/events/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.evt.gz[events] = 25 counts
[Sat Sep 24 00:34:27 2011] Mean chipx,y = (329.12, 963.36)
[Sat Sep 24 00:34:27 2011] Mean tdetx,y = (4168.64, 3390.12)
[Sat Sep 24 00:34:27 2011] chipx,y range = (309.00-352.00, 943.00-985.00)
[Sat Sep 24 00:34:27 2011] Size of ../../acisf06211/products/events/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 47 counts
[Sat Sep 24 00:34:27 2011] ../../acisf06211/products/images/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.img and ../../acisf06211/products/images/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat Sep 24 00:34:27 2011] ../../acisf06211/products/spectra/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.pi and ../../acisf06211/products/spectra/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat Sep 24 00:34:27 2011] Not generating rmf since there are only 23 counts
[Sat Sep 24 00:34:35 2011] ../../acisf06211/products/lightcurves/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.lc and ../../acisf06211/products/lightcurves/fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat Sep 24 00:35:09 2011] 180.552
[Sat Sep 24 00:35:16 2011] Updating aperture counts using extracted products
[Sat Sep 24 00:35:16 2011] Error reading totcts from fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Sep 24 00:35:16 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 00:35:16 2011] Using photon index=1.80, rate=0.000667, arf fullrun_ccd3_acisf06211_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 00:35:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 00:35:16 2011] Updating source flux to 8.5e-15
[Sat Sep 24 00:35:27 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting