[Fri Oct 7 07:23:41 2011] Detection parameters: Position = (260.2, 869.3) = 16 25 19.24 -24 26 52.7 Extent = 0.6" x 0.5", rotation angle = 161 degrees Source counts = 1638.8 +/- 40.6 Background counts = 11.2 Rate = 0.3 +/- 0.008 [Fri Oct 7 07:23:42 2011] Off-axis axis estimate = 3.12' [Fri Oct 7 07:24:15 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting [Fri Oct 7 07:24:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Oct 7 07:24:15 2011] Initial guess for spatial extent in simple fitting = 0.60" [Fri Oct 7 07:24:15 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.004 [Fri Oct 7 07:24:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.60" [Fri Oct 7 07:24:15 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass0_src1.ximg exists [Fri Oct 7 07:24:15 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass0_src1_1.ximg exists [Fri Oct 7 07:24:15 2011] Fit fullrun_ccd0_acisf00618_pi14-548_cl_pass0_src1 appears to have run properly [Fri Oct 7 07:24:15 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Fri Oct 7 07:24:15 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Fri Oct 7 07:24:15 2011] Fit fullrun_ccd0_acisf00618_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Fri Oct 7 07:24:21 2011] Spatial fit model total counts = 1641.140000, observed total counts = 1646.000000 [Fri Oct 7 07:24:21 2011] Offset between fit and detection position for source 1 = 0.699309 pixels [Fri Oct 7 07:24:21 2011] 1642.090400 total counts/ 62.650400 bgd. counts: snr = 199.545165 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.699309 pixels Position = (260.7, 869.8) = 16 25 19.24 -24 26 52.7 Extent = 0.8 (0.8-0.8)" x 0.6 (0.6-0.6)", rotation angle = 0 (360-0) degrees Source counts = 1579.4 +/- 40.5 Background counts = 62.7 Rate = 0.3 +/- 0.008 [Fri Oct 7 07:24:21 2011] Vigneting correction estimate = 1.000000 [Fri Oct 7 07:24:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Oct 7 07:24:21 2011] Assessing source extent using major axis lower bound [Fri Oct 7 07:24:21 2011] Source does appear to be extended [Fri Oct 7 07:24:21 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23 [Fri Oct 7 07:24:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Oct 7 07:24:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Oct 7 07:24:36 2011] Initial guess for spatial extent in simple fitting = 0.69" [Fri Oct 7 07:24:36 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.110 [Fri Oct 7 07:24:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.69" [Fri Oct 7 07:24:37 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1.ximg exists [Fri Oct 7 07:24:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1.csv [Fri Oct 7 07:24:37 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1_1.ximg exists [Fri Oct 7 07:24:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1.csv [Fri Oct 7 07:24:37 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf00618_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 7 07:24:37 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Fri Oct 7 07:24:37 2011] fullrun_ccd0_acisf00618_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Fri Oct 7 07:24:37 2011] Fit fullrun_ccd0_acisf00618_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Fri Oct 7 07:24:42 2011] Spatial fit model total counts = 1654.170000, observed total counts = 1648.000000 [Fri Oct 7 07:24:42 2011] Offset between fit and detection position for source 1 = 0.007313 pixels [Fri Oct 7 07:24:42 2011] 1652.237800 total counts/ 63.677800 bgd. counts: snr = 199.071733 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.007313 pixels Position = (260.6, 869.8) = 16 25 19.24 -24 26 52.7 Extent = 0.7 (0.7-0.7)", rotation angle = 0 Source counts = 1588.6 +/- 40.6 Background counts = 63.7 Rate = 0.3 +/- 0.008 [Fri Oct 7 07:24:42 2011] Vigneting correction estimate = 1.000000 [Fri Oct 7 07:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Oct 7 07:24:42 2011] Assessing source extent using major axis lower bound [Fri Oct 7 07:24:42 2011] Source does appear to be extended [Fri Oct 7 07:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Oct 7 07:24:58 2011] Not overwriting source region fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.reg [Fri Oct 7 07:24:58 2011] Extracting stamp from image fullrun_ccd0_acisf00618_pi14-548_cl_sm2.00.img.gz, (229, 838) - (292, 902) [Fri Oct 7 07:24:58 2011] Writing fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1.gif [Fri Oct 7 07:24:58 2011] ../../acisf00618/products/events/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.evt and ../../acisf00618/products/events/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Fri Oct 7 07:24:58 2011] Size of ../../acisf00618/products/events/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1612 counts [Fri Oct 7 07:24:58 2011] Mean chipx,y = (777.96, 865.87) [Fri Oct 7 07:24:58 2011] Mean tdetx,y = (3926.87, 4354.04) [Fri Oct 7 07:24:58 2011] chipx,y range = (757.00-809.00, 847.00-885.00) [Fri Oct 7 07:24:58 2011] Size of ../../acisf00618/products/events/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 45 counts [Fri Oct 7 07:24:58 2011] ../../acisf00618/products/images/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.img and ../../acisf00618/products/images/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Fri Oct 7 07:24:58 2011] ../../acisf00618/products/spectra/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.pi and ../../acisf00618/products/spectra/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Fri Oct 7 07:25:02 2011] ../../acisf00618/products/lightcurves/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.lc and ../../acisf00618/products/lightcurves/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Fri Oct 7 07:25:09 2011] Keeping rmf generated by specextract [Fri Oct 7 07:25:09 2011] 202.221 [Fri Oct 7 07:26:04 2011] Updating aperture counts using extracted products [Fri Oct 7 07:26:04 2011] Error reading totcts from fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_src.pi.gz [Fri Oct 7 07:26:04 2011] Calculating source flux in energy range 0.30-8.00 [Fri Oct 7 07:26:04 2011] Using photon index=1.80, rate=0.317, arf fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1.arf [Fri Oct 7 07:26:04 2011] Assuming count rate is from the 0.20-8.00 bandpass [Fri Oct 7 07:26:04 2011] Updating source flux to 3.3e-12 [Fri Oct 7 07:26:12 2011] Reading fit data from acisf00618/analysis//spectral/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_pl.csv [Fri Oct 7 07:26:12 2011] Spectral fit parameter nH value = 3.91843e+20 [Fri Oct 7 07:26:12 2011] Spectral fit parameter PhoIndex value = 1.88077 [Fri Oct 7 07:26:12 2011] Failed to get F(0.3-8.0) from acisf00618/analysis//spectral/fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Fri Oct 7 07:26:12 2011] Calculating source flux in energy range 0.30-8.00 [Fri Oct 7 07:26:12 2011] Using Nh = 3.9e+20, photon index=1.88, rate=0.317, arf fullrun_ccd0_acisf00618_pi14-548_pass1_cl_src1.arf [Fri Oct 7 07:26:12 2011] Assuming count rate is from the 0.20-8.00 bandpass [Fri Oct 7 07:26:12 2011] Updating source flux to 3.2e-12