[Mon Oct 17 22:45:21 2011] Detection parameters:
  Position = (567.3, 903.3) = 14 3 48.23 54 21 17.5
  Extent = 0.5" x 0.5", rotation angle = 2 degrees
  Source counts = 10.8 +/- 3.6
  Background counts = 2.2
  Rate = 0.0002 +/- 8e-05

[Mon Oct 17 22:45:22 2011] Off-axis axis estimate = 0.57'
[Mon Oct 17 22:46:32 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:46:32 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 17 22:46:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.350
[Mon Oct 17 22:46:32 2011] Giving source the simple spatial ID 44 for pass 0, mean size = 0.39"
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44.csv
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44_1.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44.csv
[Mon Oct 17 22:46:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src44.ximg exists
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src44_1.ximg exists
[Mon Oct 17 22:46:36 2011] Fit fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src44 appears to have run properly
[Mon Oct 17 22:46:49 2011] Spatial fit model total counts = 15.861400, observed total counts = 16.000000
[Mon Oct 17 22:46:49 2011] Offset between fit and detection position for source 30 = 0.893997 pixels
[Mon Oct 17 22:46:49 2011] 15.455980 total counts/ 3.767580 bgd. counts: snr = 6.021765
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.893997 pixels
  Position = (568.1, 903.7) = 14 3 48.21 54 21 17.4
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 11.7 +/- 3.9
  Background counts = 3.8
  Rate = 0.0002 +/- 8e-05
[Mon Oct 17 22:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:46:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:46:49 2011] Source does appear to be extended
[Mon Oct 17 22:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:47:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:47:10 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Oct 17 22:47:10 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.952
[Mon Oct 17 22:47:10 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 0.51"
[Mon Oct 17 22:47:13 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41.ximg exists
[Mon Oct 17 22:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41.csv
[Mon Oct 17 22:47:13 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41_1.ximg exists
[Mon Oct 17 22:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41.csv
[Mon Oct 17 22:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:47:14 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Mon Oct 17 22:47:14 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Mon Oct 17 22:47:14 2011] Fit fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Mon Oct 17 22:47:26 2011] Spatial fit model total counts = 15.533700, observed total counts = 16.000000
[Mon Oct 17 22:47:26 2011] Offset between fit and detection position for source 30 = 0.014081 pixels
[Mon Oct 17 22:47:26 2011] 14.958680 total counts/ 3.441280 bgd. counts: snr = 6.208611
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.014081 pixels
  Position = (568.1, 903.8) = 14 3 48.21 54 21 17.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.5 +/- 3.9
  Background counts = 3.4
  Rate = 0.0002 +/- 8e-05
[Mon Oct 17 22:47:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:47:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:47:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:47:26 2011] Source does appear to be extended
[Mon Oct 17 22:47:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:49:19 2011] Not overwriting source region fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.reg
[Mon Oct 17 22:49:19 2011] Extracting stamp from image fullrun_ccd7_acisf06170_pi14-548_cl_sm2.00.img.gz, (544, 880) - (592, 928)
[Mon Oct 17 22:49:19 2011] Writing fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30.gif
[Mon Oct 17 22:51:25 2011] ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.evt and ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Mon Oct 17 22:51:25 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.evt.gz[events] = 13 counts
[Mon Oct 17 22:51:25 2011] Mean chipx,y = (273.46, 526.08)
[Mon Oct 17 22:51:25 2011] Mean tdetx,y = (4190.46, 2228.08)
[Mon Oct 17 22:51:25 2011] chipx,y range = (259.00-290.00, 509.00-542.00)
[Mon Oct 17 22:51:25 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 26 counts
[Mon Oct 17 22:51:25 2011] ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.img and ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Mon Oct 17 22:51:25 2011] ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.pi and ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Mon Oct 17 22:51:25 2011] Not generating rmf since there are only 11 counts
[Mon Oct 17 22:51:28 2011] ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.lc and ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Mon Oct 17 22:51:48 2011] 239.721
[Mon Oct 17 22:51:52 2011] Updating aperture counts using extracted products
[Mon Oct 17 22:51:52 2011] Error reading totcts from fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30_src.pi.gz
[Mon Oct 17 22:51:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:51:53 2011] Using photon index=1.80, rate=0.00024, arf fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src30.arf
[Mon Oct 17 22:51:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:51:53 2011] Updating source flux to 1.7e-15
[Mon Oct 17 22:52:10 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting