[Mon Oct 17 22:45:21 2011] Detection parameters:
  Position = (513.6, 848.1) = 14 3 51.25 54 20 50.3
  Extent = 0.7" x 0.5", rotation angle = 159 degrees
  Source counts = 14.6 +/- 4.1
  Background counts = 2.4
  Rate = 0.0003 +/- 9e-05

[Mon Oct 17 22:45:22 2011] Off-axis axis estimate = 1.01'
[Mon Oct 17 22:46:32 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:46:32 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 17 22:46:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Mon Oct 17 22:46:32 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.38"
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 22:46:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Oct 17 22:46:35 2011] Fit fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Oct 17 22:46:49 2011] Spatial fit model total counts = 19.988400, observed total counts = 20.000000
[Mon Oct 17 22:46:49 2011] Offset between fit and detection position for source 26 = 0.947374 pixels
[Mon Oct 17 22:46:49 2011] 19.778810 total counts/ 7.310510 bgd. counts: snr = 4.611406
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.947374 pixels
  Position = (514.0, 849.0) = 14 3 51.26 54 20 50.5
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 12.5 +/- 4.4
  Background counts = 7.3
  Rate = 0.0003 +/- 9e-05
[Mon Oct 17 22:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:46:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:46:49 2011] Source does appear to be extended
[Mon Oct 17 22:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:47:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:47:10 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Oct 17 22:47:10 2011] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.478
[Mon Oct 17 22:47:10 2011] Skipping simple spatial due to low active detector fraction
[Mon Oct 17 22:47:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:47:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:47:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:47:26 2011] Source does appear to be extended
[Mon Oct 17 22:47:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:49:18 2011] Not overwriting source region fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.reg
[Mon Oct 17 22:49:18 2011] Extracting stamp from image fullrun_ccd7_acisf06170_pi14-548_cl_sm2.00.img.gz, (493, 828) - (535, 870)
[Mon Oct 17 22:49:19 2011] Writing fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26.gif
[Mon Oct 17 22:51:04 2011] ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.evt and ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Mon Oct 17 22:51:04 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.evt.gz[events] = 14 counts
[Mon Oct 17 22:51:04 2011] Mean chipx,y = (284.86, 603.57)
[Mon Oct 17 22:51:04 2011] Mean tdetx,y = (4201.86, 2305.57)
[Mon Oct 17 22:51:04 2011] chipx,y range = (268.00-304.00, 585.00-623.00)
[Mon Oct 17 22:51:04 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 15 counts
[Mon Oct 17 22:51:04 2011] ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.img and ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Mon Oct 17 22:51:04 2011] ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.pi and ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Mon Oct 17 22:51:04 2011] Not generating rmf since there are only 12 counts
[Mon Oct 17 22:51:07 2011] ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.lc and ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Mon Oct 17 22:51:48 2011] 238.332
[Mon Oct 17 22:51:52 2011] Updating aperture counts using extracted products
[Mon Oct 17 22:51:52 2011] Error reading totcts from fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26_src.pi.gz
[Mon Oct 17 22:51:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:51:53 2011] Using photon index=1.80, rate=0.00026, arf fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src26.arf
[Mon Oct 17 22:51:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:51:53 2011] Updating source flux to 1.8e-15
[Mon Oct 17 22:52:10 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting