[Mon Oct 17 22:45:21 2011] Detection parameters:
  Position = (725.0, 557.5) = 14 3 39.36 54 18 27.3
  Extent = 0.9" x 0.5", rotation angle = 62 degrees
  Source counts = 24.5 +/- 5.4
  Background counts = 4.5
  Rate = 0.0005 +/- 0.0001

[Mon Oct 17 22:45:22 2011] Off-axis axis estimate = 3.69'
[Mon Oct 17 22:46:32 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:46:32 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Mon Oct 17 22:46:32 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Mon Oct 17 22:46:32 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.74"
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29.csv
[Mon Oct 17 22:46:34 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Oct 17 22:46:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29.csv
[Mon Oct 17 22:46:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06170_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Oct 17 22:46:35 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Oct 17 22:46:35 2011] Fit fullrun_ccd7_acisf06170_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Oct 17 22:46:49 2011] Spatial fit model total counts = 34.993800, observed total counts = 35.000000
[Mon Oct 17 22:46:49 2011] Offset between fit and detection position for source 21 = 0.735061 pixels
[Mon Oct 17 22:46:49 2011] 34.974600 total counts/ 10.605400 bgd. counts: snr = 7.483034
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.735061 pixels
  Position = (725.5, 558.0) = 14 3 39.36 54 18 27.3
  Extent = 0.8 (0.5-1.3)", rotation angle = 0
  Source counts = 24.4 +/- 5.9
  Background counts = 10.6
  Rate = 0.0005 +/- 0.0001
[Mon Oct 17 22:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:46:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:46:49 2011] Source does appear to be extended
[Mon Oct 17 22:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:47:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:47:10 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Oct 17 22:47:10 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Mon Oct 17 22:47:10 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.84"
[Mon Oct 17 22:47:12 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28.ximg exists
[Mon Oct 17 22:47:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28.csv
[Mon Oct 17 22:47:12 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Oct 17 22:47:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28.csv
[Mon Oct 17 22:47:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06170_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:47:13 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Oct 17 22:47:13 2011] fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Oct 17 22:47:13 2011] Fit fullrun_ccd7_acisf06170_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Oct 17 22:47:26 2011] Spatial fit model total counts = 34.523600, observed total counts = 35.000000
[Mon Oct 17 22:47:26 2011] Offset between fit and detection position for source 21 = 0.151217 pixels
[Mon Oct 17 22:47:26 2011] 34.327300 total counts/ 9.114400 bgd. counts: snr = 8.351390
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.151217 pixels
  Position = (725.7, 557.9) = 14 3 39.35 54 18 27.3
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 25.2 +/- 5.9
  Background counts = 9.1
  Rate = 0.0005 +/- 0.0001
[Mon Oct 17 22:47:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:47:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:47:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:47:26 2011] Source does appear to be extended
[Mon Oct 17 22:47:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:49:18 2011] Not overwriting source region fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.reg
[Mon Oct 17 22:49:18 2011] Extracting stamp from image fullrun_ccd7_acisf06170_pi14-548_cl_sm2.00.img.gz, (684, 517) - (767, 599)
[Mon Oct 17 22:49:18 2011] Writing fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21.gif
[Mon Oct 17 22:50:44 2011] ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.evt and ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Mon Oct 17 22:50:44 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.evt.gz[events] = 31 counts
[Mon Oct 17 22:50:44 2011] Mean chipx,y = (645.23, 602.58)
[Mon Oct 17 22:50:44 2011] Mean tdetx,y = (4562.23, 2304.58)
[Mon Oct 17 22:50:44 2011] chipx,y range = (629.00-663.00, 585.00-624.00)
[Mon Oct 17 22:50:44 2011] Size of ../../acisf06170/products/events/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 88 counts
[Mon Oct 17 22:50:44 2011] ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.img and ../../acisf06170/products/images/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Mon Oct 17 22:50:44 2011] ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.pi and ../../acisf06170/products/spectra/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Mon Oct 17 22:50:44 2011] Not generating rmf since there are only 25 counts
[Mon Oct 17 22:50:47 2011] ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.lc and ../../acisf06170/products/lightcurves/fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Mon Oct 17 22:51:48 2011] 224.999
[Mon Oct 17 22:51:52 2011] Updating aperture counts using extracted products
[Mon Oct 17 22:51:52 2011] Error reading totcts from fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21_src.pi.gz
[Mon Oct 17 22:51:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:51:53 2011] Using photon index=1.80, rate=0.000526, arf fullrun_ccd7_acisf06170_pi14-548_pass1_cl_src21.arf
[Mon Oct 17 22:51:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:51:53 2011] Updating source flux to 3.8e-15
[Mon Oct 17 22:52:10 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting