[Sat Sep 24 00:47:04 2011] Detection parameters:
  Position = (1127.1, 505.0) = 16 26 24.06 -24 24 48.2
  Extent = 2.1" x 1.3", rotation angle = 56 degrees
  Source counts = 72.9 +/- 8.8
  Background counts = 4.1
  Rate = 0.02 +/- 0.002

[Sat Sep 24 00:47:04 2011] Off-axis axis estimate = 7.60'
[Sat Sep 24 00:47:54 2011] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:47:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 00:47:54 2011] Initial guess for spatial extent in simple fitting = 2.56"
[Sat Sep 24 00:47:54 2011] source mask rpix=5.2, npix_max = 129, mask sum = 144, frac = 1.108
[Sat Sep 24 00:47:54 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.56"
[Sat Sep 24 00:47:54 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5.ximg exists
[Sat Sep 24 00:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 00:47:54 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Sep 24 00:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 00:47:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00617_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:47:54 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep 24 00:47:54 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep 24 00:47:54 2011] Fit fullrun_ccd1_acisf00617_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep 24 00:48:03 2011] Spatial fit model total counts = 80.485100, observed total counts = 79.000000
[Sat Sep 24 00:48:03 2011] Offset between fit and detection position for source 5 = 0.690938 pixels
[Sat Sep 24 00:48:03 2011] 81.398900 total counts/ 20.272700 bgd. counts: snr = 13.575993
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.690938 pixels
  Position = (1126.8, 504.4) = 16 26 24.09 -24 24 48.7
  Extent = 1.8 (1.4-2.4)", rotation angle = 0
  Source counts = 61.1 +/- 9.0
  Background counts = 20.3
  Rate = 0.01 +/- 0.002
[Sat Sep 24 00:48:03 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 00:48:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 00:48:03 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 00:48:03 2011] Source does appear to be extended
[Sat Sep 24 00:48:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:48:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:48:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 00:48:26 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Sat Sep 24 00:48:26 2011] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.040
[Sat Sep 24 00:48:26 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.80"
[Sat Sep 24 00:48:27 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5.ximg exists
[Sat Sep 24 00:48:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 00:48:27 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Sep 24 00:48:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 00:48:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00617_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:48:28 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Sep 24 00:48:28 2011] fullrun_ccd1_acisf00617_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Sep 24 00:48:28 2011] Fit fullrun_ccd1_acisf00617_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Sep 24 00:48:39 2011] Spatial fit model total counts = 67.416500, observed total counts = 68.000000
[Sat Sep 24 00:48:39 2011] Offset between fit and detection position for source 5 = 0.357141 pixels
[Sat Sep 24 00:48:39 2011] 68.091340 total counts/ 3.786440 bgd. counts: snr = 33.046733
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.357141 pixels
  Position = (1126.8, 504.0) = 16 26 24.10 -24 24 48.9
  Extent = 1.9 (1.2-2.3)", rotation angle = 0
  Source counts = 64.3 +/- 8.3
  Background counts = 3.8
  Rate = 0.01 +/- 0.002
[Sat Sep 24 00:48:39 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 00:48:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 00:48:39 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 00:48:39 2011] Source does appear to be extended
[Sat Sep 24 00:48:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:49:35 2011] Not overwriting source region fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.reg
[Sat Sep 24 00:49:35 2011] Extracting stamp from image fullrun_ccd1_acisf00617_pi14-548_cl_sm2.00.img.gz, (1040, 418) - (1213, 590)
[Sat Sep 24 00:49:35 2011] Writing fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5.gif
[Sat Sep 24 00:49:53 2011] ../../acisf00617/products/events/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.evt and ../../acisf00617/products/events/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Sep 24 00:49:53 2011] Size of ../../acisf00617/products/events/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.evt.gz[events] = 78 counts
[Sat Sep 24 00:49:53 2011] Mean chipx,y = (229.78, 119.56)
[Sat Sep 24 00:49:53 2011] Mean tdetx,y = (5012.44, 4336.78)
[Sat Sep 24 00:49:53 2011] chipx,y range = (209.00-254.00, 99.00-147.00)
[Sat Sep 24 00:49:53 2011] Size of ../../acisf00617/products/events/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 19 counts
[Sat Sep 24 00:49:53 2011] ../../acisf00617/products/images/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.img and ../../acisf00617/products/images/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Sep 24 00:49:53 2011] ../../acisf00617/products/spectra/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.pi and ../../acisf00617/products/spectra/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Sep 24 00:49:53 2011] Not generating rmf since there are only 64 counts
[Sat Sep 24 00:49:58 2011] ../../acisf00617/products/lightcurves/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.lc and ../../acisf00617/products/lightcurves/fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Sep 24 00:50:12 2011] 178.92
[Sat Sep 24 00:51:09 2011] Updating aperture counts using extracted products
[Sat Sep 24 00:51:09 2011] Error reading totcts from fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Sep 24 00:51:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 00:51:10 2011] Using photon index=1.80, rate=0.0135, arf fullrun_ccd1_acisf00617_pi14-548_pass1_cl_src5.arf
[Sat Sep 24 00:51:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 00:51:10 2011] Updating source flux to 1.6e-13
[Sat Sep 24 00:51:14 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting