[Fri Oct 21 18:04:34 2011] Detection parameters:
  Position = (1225.4, 801.0) = 12 25 15.64 12 44 40.8
  Extent = 3.7" x 3.1", rotation angle = 40 degrees
  Source counts = 181.7 +/- 15.3
  Background counts = 53.3
  Rate = 0.004 +/- 0.0004

[Fri Oct 21 18:04:34 2011] Off-axis axis estimate = 9.67'
[Fri Oct 21 18:05:47 2011] Using EEF radius (= 4.14 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:05:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:05:47 2011] Initial guess for spatial extent in simple fitting = 4.14"
[Fri Oct 21 18:05:47 2011] source mask rpix=8.4, npix_max = 318, mask sum = 324, frac = 1.019
[Fri Oct 21 18:05:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.14"
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 18:05:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 18:05:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:05:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:05:47 2011] Fit fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:06:00 2011] Spatial fit model total counts = 281.000000, observed total counts = 281.000000
[Fri Oct 21 18:06:00 2011] Offset between fit and detection position for source 8 = 1.533139 pixels
[Fri Oct 21 18:06:00 2011] 280.714000 total counts/ 102.659000 bgd. counts: snr = 17.573395
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.533139 pixels
  Position = (1226.9, 801.3) = 12 25 15.61 12 44 40.6
  Extent = 3.4 (2.9-3.8)", rotation angle = 0
  Source counts = 178.1 +/- 16.8
  Background counts = 102.7
  Rate = 0.004 +/- 0.0004
[Fri Oct 21 18:06:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:06:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:06:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:06:00 2011] Source does appear to be extended
[Fri Oct 21 18:06:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:06:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:06:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:06:32 2011] Initial guess for spatial extent in simple fitting = 3.38"
[Fri Oct 21 18:06:32 2011] source mask rpix=6.9, npix_max = 216, mask sum = 210, frac = 0.968
[Fri Oct 21 18:06:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.38"
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:06:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:06:33 2011] Fit fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:06:42 2011] Spatial fit model total counts = 250.000000, observed total counts = 250.000000
[Fri Oct 21 18:06:42 2011] Offset between fit and detection position for source 8 = 0.105278 pixels
[Fri Oct 21 18:06:42 2011] 249.643000 total counts/ 76.551000 bgd. counts: snr = 19.783429
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.105278 pixels
  Position = (1227.0, 801.3) = 12 25 15.61 12 44 40.6
  Extent = 3.3 (2.8-3.8)", rotation angle = 0
  Source counts = 173.1 +/- 15.8
  Background counts = 76.6
  Rate = 0.004 +/- 0.0004
[Fri Oct 21 18:06:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:06:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:06:42 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:06:42 2011] Source does appear to be extended
[Fri Oct 21 18:06:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:07:19 2011] Not overwriting source region fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.reg
[Fri Oct 21 18:07:19 2011] Extracting stamp from image fullrun_ccd3_acisf06131_pi14-548_cl_sm2.00.img.gz, (1076, 650) - (1378, 952)
[Fri Oct 21 18:07:19 2011] Writing fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8.gif
[Fri Oct 21 18:07:20 2011] ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.evt and ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct 21 18:07:20 2011] Size of ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.evt.gz[events] = 234 counts
[Fri Oct 21 18:07:20 2011] Mean chipx,y = (52.38, 252.83)
[Fri Oct 21 18:07:20 2011] Mean tdetx,y = (4879.17, 3113.38)
[Fri Oct 21 18:07:20 2011] chipx,y range = (9.00-94.00, 216.00-292.00)
[Fri Oct 21 18:07:20 2011] Size of ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 365 counts
[Fri Oct 21 18:07:20 2011] ../../acisf06131/products/images/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.img and ../../acisf06131/products/images/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct 21 18:07:20 2011] ../../acisf06131/products/spectra/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.pi and ../../acisf06131/products/spectra/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct 21 18:07:25 2011] ../../acisf06131/products/lightcurves/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.lc and ../../acisf06131/products/lightcurves/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct 21 18:07:48 2011] Keeping rmf generated by specextract
[Fri Oct 21 18:07:48 2011] 162.101
[Fri Oct 21 18:11:17 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:11:17 2011] Error reading totcts from fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct 21 18:11:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:11:17 2011] Using photon index=1.80, rate=0.00423, arf fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8.arf
[Fri Oct 21 18:11:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:11:17 2011] Updating source flux to 6.1e-14
[Fri Oct 21 18:11:28 2011] Reading fit data from acisf06131/analysis//spectral/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_pl.csv
[Fri Oct 21 18:11:28 2011] Spectral fit parameter nH value = 1.16527e+15
[Fri Oct 21 18:11:28 2011] Spectral fit parameter PhoIndex value = 2.00359
[Fri Oct 21 18:11:28 2011] Failed to get F(0.3-8.0) from acisf06131/analysis//spectral/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 18:11:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:11:28 2011] Using Nh = 1.2e+15, photon index=2.00, rate=0.00423, arf fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src8.arf
[Fri Oct 21 18:11:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:11:28 2011] Updating source flux to 6.3e-14