[Fri Oct 21 18:04:34 2011] Detection parameters:
  Position = (748.9, 1187.0) = 12 25 31.67 12 47 50.6
  Extent = 3.1" x 1.9", rotation angle = 14 degrees
  Source counts = 21.7 +/- 6.2
  Background counts = 16.3
  Rate = 0.0005 +/- 0.0002

[Fri Oct 21 18:04:34 2011] Off-axis axis estimate = 8.66'
[Fri Oct 21 18:05:47 2011] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:05:47 2011] Initial guess for spatial extent in simple fitting = 3.31"
[Fri Oct 21 18:05:47 2011] source mask rpix=6.7, npix_max = 209, mask sum = 196, frac = 0.936
[Fri Oct 21 18:05:47 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.31"
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 21 18:05:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6.csv
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 21 18:05:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6.csv
[Fri Oct 21 18:05:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06131_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 21 18:05:47 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 21 18:05:47 2011] Fit fullrun_ccd3_acisf06131_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 21 18:06:00 2011] Spatial fit model total counts = 55.016300, observed total counts = 55.000000
[Fri Oct 21 18:06:00 2011] Offset between fit and detection position for source 7 = 0.768274 pixels
[Fri Oct 21 18:06:00 2011] 55.141400 total counts/ 32.322000 bgd. counts: snr = 4.013794
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.768274 pixels
  Position = (748.6, 1187.7) = 12 25 31.70 12 47 50.7
  Extent = 3.1 (1.9-4.8)", rotation angle = 0
  Source counts = 22.8 +/- 7.4
  Background counts = 32.3
  Rate = 0.0006 +/- 0.0002
[Fri Oct 21 18:06:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:06:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:06:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:06:00 2011] Source does appear to be extended
[Fri Oct 21 18:06:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:06:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:06:32 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Fri Oct 21 18:06:32 2011] source mask rpix=6.3, npix_max = 182, mask sum = 169, frac = 0.926
[Fri Oct 21 18:06:32 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.08"
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 21 18:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6.csv
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 21 18:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6.csv
[Fri Oct 21 18:06:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06131_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 21 18:06:33 2011] fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 21 18:06:33 2011] Fit fullrun_ccd3_acisf06131_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 21 18:06:42 2011] Spatial fit model total counts = 47.903900, observed total counts = 48.000000
[Fri Oct 21 18:06:42 2011] Offset between fit and detection position for source 7 = 1.436612 pixels
[Fri Oct 21 18:06:42 2011] 48.295700 total counts/ 22.187900 bgd. counts: snr = 5.542583
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.436612 pixels
  Position = (747.2, 1187.4) = 12 25 31.75 12 47 50.5
  Extent = 3.3 (2.1-5.2)", rotation angle = 0
  Source counts = 26.1 +/- 6.9
  Background counts = 22.2
  Rate = 0.0006 +/- 0.0002
[Fri Oct 21 18:06:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:06:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:06:42 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:06:42 2011] Source does appear to be extended
[Fri Oct 21 18:06:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:07:19 2011] Not overwriting source region fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.reg
[Fri Oct 21 18:07:19 2011] Extracting stamp from image fullrun_ccd3_acisf06131_pi14-548_cl_sm2.00.img.gz, (595, 1036) - (899, 1339)
[Fri Oct 21 18:07:19 2011] Writing fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7.gif
[Fri Oct 21 18:07:41 2011] ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.evt and ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Oct 21 18:07:41 2011] Size of ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.evt.gz[events] = 61 counts
[Fri Oct 21 18:07:41 2011] Mean chipx,y = (192.16, 850.39)
[Fri Oct 21 18:07:41 2011] Mean tdetx,y = (4281.61, 3253.16)
[Fri Oct 21 18:07:41 2011] chipx,y range = (152.00-230.00, 822.00-880.00)
[Fri Oct 21 18:07:41 2011] Size of ../../acisf06131/products/events/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 462 counts
[Fri Oct 21 18:07:41 2011] ../../acisf06131/products/images/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.img and ../../acisf06131/products/images/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Oct 21 18:07:41 2011] ../../acisf06131/products/spectra/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.pi and ../../acisf06131/products/spectra/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Oct 21 18:07:41 2011] Not generating rmf since there are only 26 counts
[Fri Oct 21 18:07:44 2011] ../../acisf06131/products/lightcurves/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.lc and ../../acisf06131/products/lightcurves/fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Oct 21 18:07:48 2011] 168.696
[Fri Oct 21 18:11:17 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:11:17 2011] Error reading totcts from fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Oct 21 18:11:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:11:17 2011] Using photon index=1.80, rate=0.000638, arf fullrun_ccd3_acisf06131_pi14-548_pass1_cl_src7.arf
[Fri Oct 21 18:11:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:11:17 2011] Updating source flux to 8.5e-15
[Fri Oct 21 18:11:23 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting