[Mon Oct  3 17:08:24 2011] Detection parameters:
  Position = (75.7, 323.6) = 15 13 55.83 -59 8 23.5
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 130.8 +/- 17.1
  Background counts = 162.2
  Rate = 0.003 +/- 0.0004

[Mon Oct  3 17:08:37 2011] Off-axis axis estimate = 0.33'
[Mon Oct  3 17:11:56 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 17:11:56 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct  3 17:11:56 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Mon Oct  3 17:11:56 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.40"
[Mon Oct  3 17:11:58 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21.ximg exists
[Mon Oct  3 17:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21.csv
[Mon Oct  3 17:11:58 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Oct  3 17:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21.csv
[Mon Oct  3 17:11:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06116_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 17:12:01 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct  3 17:12:01 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct  3 17:12:01 2011] Fit fullrun_ccd3_acisf06116_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Oct  3 17:12:33 2011] Spatial fit model total counts = 699.997000, observed total counts = 700.000000
[Mon Oct  3 17:12:33 2011] Offset between fit and detection position for source 23 = 2.597276 pixels
[Mon Oct  3 17:12:33 2011] 703.261200 total counts/ 631.401000 bgd. counts: snr = 2.859801
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.597276 pixels
  Position = (77.3, 325.7) = 15 13 55.76 -59 8 22.7
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 71.9 +/- 26.5
  Background counts = 631.4
  Rate = 0.002 +/- 0.0006
[Mon Oct  3 17:12:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 17:12:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 17:12:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 17:12:33 2011] Source does appear to be extended
[Mon Oct  3 17:12:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 17:13:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 17:13:02 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Mon Oct  3 17:13:02 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Mon Oct  3 17:13:02 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.96"
[Mon Oct  3 17:13:03 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21.ximg exists
[Mon Oct  3 17:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21.csv
[Mon Oct  3 17:13:03 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21_1.ximg exists
[Mon Oct  3 17:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21.csv
[Mon Oct  3 17:13:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06116_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 17:13:04 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Mon Oct  3 17:13:04 2011] fullrun_ccd3_acisf06116_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Oct  3 17:13:04 2011] Fit fullrun_ccd3_acisf06116_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Oct  3 17:13:22 2011] Spatial fit model total counts = 704.030000, observed total counts = 705.000000
[Mon Oct  3 17:13:22 2011] Offset between fit and detection position for source 23 = 0.183190 pixels
[Mon Oct  3 17:13:22 2011] 704.006100 total counts/ 622.115000 bgd. counts: snr = 3.283230
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.183190 pixels
  Position = (77.4, 325.8) = 15 13 55.75 -59 8 22.7
  Extent = 1.0 (0.6-1.9)", rotation angle = 0
  Source counts = 81.9 +/- 26.5
  Background counts = 622.1
  Rate = 0.002 +/- 0.0006
[Mon Oct  3 17:13:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 17:13:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 17:13:22 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 17:13:22 2011] Source does appear to be extended
[Mon Oct  3 17:13:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 17:16:54 2011] Not overwriting source region fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.reg
[Mon Oct  3 17:16:54 2011] Extracting stamp from image fullrun_ccd3_acisf06116_pi14-548_cl_sm2.00.img.gz, (30, 278) - (125, 373)
[Mon Oct  3 17:16:54 2011] Writing fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23.gif
[Mon Oct  3 17:17:57 2011] ../../acisf06116/products/events/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.evt and ../../acisf06116/products/events/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Oct  3 17:17:57 2011] Size of ../../acisf06116/products/events/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.evt.gz[events] = 611 counts
[Mon Oct  3 17:17:57 2011] Mean chipx,y = (977.84, 974.62)
[Mon Oct  3 17:17:57 2011] Mean tdetx,y = (4157.38, 4038.84)
[Mon Oct  3 17:17:57 2011] chipx,y range = (946.00-1003.00, 951.00-1002.00)
[Mon Oct  3 17:17:57 2011] Size of ../../acisf06116/products/events/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 1475 counts
[Mon Oct  3 17:17:57 2011] ../../acisf06116/products/images/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.img and ../../acisf06116/products/images/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Oct  3 17:17:57 2011] ../../acisf06116/products/spectra/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.pi and ../../acisf06116/products/spectra/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Oct  3 17:17:57 2011] Not generating rmf since there are only 81 counts
[Mon Oct  3 17:18:00 2011] ../../acisf06116/products/lightcurves/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.lc and ../../acisf06116/products/lightcurves/fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Oct  3 17:18:45 2011] 204.232
[Mon Oct  3 17:18:55 2011] Updating aperture counts using extracted products
[Mon Oct  3 17:18:55 2011] Error reading totcts from fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Oct  3 17:18:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 17:18:56 2011] Using photon index=1.80, rate=0.00174, arf fullrun_ccd3_acisf06116_pi14-548_pass1_cl_src23.arf
[Mon Oct  3 17:18:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 17:18:56 2011] Updating source flux to 2.8e-14
[Mon Oct  3 17:19:48 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting