[Fri Oct 21 08:24:31 2011] Detection parameters:
  Position = (512.4, 747.0) = 14 3 25.17 54 20 49.5
  Extent = 0.6" x 0.5", rotation angle = 40 degrees
  Source counts = 14.6 +/- 4.1
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 08:24:32 2011] Off-axis axis estimate = 2.12'
[Fri Oct 21 08:25:41 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:25:41 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct 21 08:25:41 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.765
[Fri Oct 21 08:25:41 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 0.44"
[Fri Oct 21 08:25:43 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34.ximg exists
[Fri Oct 21 08:25:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34.csv
[Fri Oct 21 08:25:43 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34_1.ximg exists
[Fri Oct 21 08:25:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34.csv
[Fri Oct 21 08:25:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06115_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:25:44 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Fri Oct 21 08:25:44 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Oct 21 08:25:44 2011] Fit fullrun_ccd7_acisf06115_pi14-548_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Oct 21 08:26:01 2011] Spatial fit model total counts = 23.340100, observed total counts = 25.000000
[Fri Oct 21 08:26:01 2011] Offset between fit and detection position for source 36 = 0.720968 pixels
[Fri Oct 21 08:26:01 2011] 25.058400 total counts/ 10.116500 bgd. counts: snr = 4.697758
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.720968 pixels
  Position = (513.0, 747.4) = 14 3 25.17 54 20 49.4
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.9 +/- 5.0
  Background counts = 10.1
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 08:26:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:26:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:26:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:26:01 2011] Source does appear to be extended
[Fri Oct 21 08:26:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:26:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:26:25 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Oct 21 08:26:25 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.048
[Fri Oct 21 08:26:25 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 0.72"
[Fri Oct 21 08:26:26 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34.ximg exists
[Fri Oct 21 08:26:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34.csv
[Fri Oct 21 08:26:26 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34_1.ximg exists
[Fri Oct 21 08:26:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34.csv
[Fri Oct 21 08:26:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06115_pi14-548_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:26:28 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass1_tfrozen_src34.ximg exists
[Fri Oct 21 08:26:28 2011] fullrun_ccd7_acisf06115_pi14-548_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Oct 21 08:26:28 2011] Fit fullrun_ccd7_acisf06115_pi14-548_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Oct 21 08:26:43 2011] Spatial fit model total counts = 24.613300, observed total counts = 25.000000
[Fri Oct 21 08:26:43 2011] Offset between fit and detection position for source 36 = 0.049938 pixels
[Fri Oct 21 08:26:43 2011] 25.779000 total counts/ 10.922200 bgd. counts: snr = 4.495419
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.049938 pixels
  Position = (513.0, 747.4) = 14 3 25.16 54 20 49.4
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.9 +/- 5.1
  Background counts = 10.9
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 08:26:43 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:26:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:26:43 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:26:43 2011] Source does appear to be extended
[Fri Oct 21 08:26:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:29:24 2011] Not overwriting source region fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.reg
[Fri Oct 21 08:29:24 2011] Extracting stamp from image fullrun_ccd7_acisf06115_pi14-548_cl_sm2.00.img.gz, (481, 715) - (545, 780)
[Fri Oct 21 08:29:24 2011] Writing fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36.gif
[Fri Oct 21 08:30:57 2011] ../../acisf06115/products/events/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.evt and ../../acisf06115/products/events/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Oct 21 08:30:57 2011] Size of ../../acisf06115/products/events/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.evt.gz[events] = 20 counts
[Fri Oct 21 08:30:57 2011] Mean chipx,y = (393.15, 329.45)
[Fri Oct 21 08:30:57 2011] Mean tdetx,y = (4310.15, 2031.45)
[Fri Oct 21 08:30:57 2011] chipx,y range = (373.00-410.00, 313.00-350.00)
[Fri Oct 21 08:30:57 2011] Size of ../../acisf06115/products/events/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 48 counts
[Fri Oct 21 08:30:57 2011] ../../acisf06115/products/images/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.img and ../../acisf06115/products/images/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Oct 21 08:30:57 2011] ../../acisf06115/products/spectra/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.pi and ../../acisf06115/products/spectra/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Oct 21 08:30:57 2011] Not generating rmf since there are only 14 counts
[Fri Oct 21 08:31:00 2011] ../../acisf06115/products/lightcurves/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.lc and ../../acisf06115/products/lightcurves/fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Oct 21 08:31:56 2011] 235.239
[Fri Oct 21 08:32:02 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:32:02 2011] Error reading totcts from fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Oct 21 08:32:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:32:02 2011] Using photon index=1.80, rate=0.000415, arf fullrun_ccd7_acisf06115_pi14-548_pass1_cl_src36.arf
[Fri Oct 21 08:32:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:32:02 2011] Updating source flux to 2.9e-15
[Fri Oct 21 08:32:29 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting