[Fri Oct 21 08:24:26 2011] Detection parameters:
  Position = (623.2, 199.4) = 14 3 53.80 54 9 42.3
  Extent = 0.5" x 0.5", rotation angle = 167 degrees
  Source counts = 311.0 +/- 20.0
  Background counts = 89.0
  Rate = 0.009 +/- 0.0006

[Fri Oct 21 08:24:28 2011] Off-axis axis estimate = 10.01'
[Fri Oct 21 08:25:39 2011] Using EEF radius (= 4.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:25:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:25:39 2011] Initial guess for spatial extent in simple fitting = 4.44"
[Fri Oct 21 08:25:39 2011] source mask rpix=9.0, npix_max = 362, mask sum = 309, frac = 0.853
[Fri Oct 21 08:25:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.44"
[Fri Oct 21 08:25:40 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 08:25:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 08:25:40 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 08:25:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 08:25:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06115_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:25:40 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 08:25:40 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 08:25:40 2011] Fit fullrun_ccd6_acisf06115_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 08:25:55 2011] Spatial fit model total counts = 547.936000, observed total counts = 551.000000
[Fri Oct 21 08:25:55 2011] Offset between fit and detection position for source 2 = 6.709738 pixels
[Fri Oct 21 08:25:55 2011] 547.722200 total counts/ 47.040200 bgd. counts: snr = 73.000763
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.709738 pixels
  Position = (622.2, 192.8) = 14 3 53.88 54 9 38.8
  Extent = 5.9 (5.4-6.4)", rotation angle = 0
  Source counts = 500.7 +/- 23.4
  Background counts = 47.0
  Rate = 0.01 +/- 0.0007
[Fri Oct 21 08:25:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:25:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:25:55 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:25:55 2011] Source does appear to be extended
[Fri Oct 21 08:25:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:26:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:26:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:26:23 2011] Initial guess for spatial extent in simple fitting = 5.87"
[Fri Oct 21 08:26:23 2011] source mask rpix=11.9, npix_max = 617, mask sum = 584, frac = 0.946
[Fri Oct 21 08:26:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.87"
[Fri Oct 21 08:26:24 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 08:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:26:24 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 08:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:26:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06115_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:26:24 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 08:26:24 2011] fullrun_ccd6_acisf06115_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 08:26:24 2011] Fit fullrun_ccd6_acisf06115_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 08:26:37 2011] Spatial fit model total counts = 601.553000, observed total counts = 597.000000
[Fri Oct 21 08:26:37 2011] Offset between fit and detection position for source 2 = 0.246757 pixels
[Fri Oct 21 08:26:37 2011] 601.082000 total counts/ 106.107000 bgd. counts: snr = 48.051975
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.246757 pixels
  Position = (622.0, 192.9) = 14 3 53.89 54 9 38.9
  Extent = 5.8 (5.4-6.3)", rotation angle = 0
  Source counts = 495.0 +/- 24.5
  Background counts = 106.1
  Rate = 0.01 +/- 0.0007
[Fri Oct 21 08:26:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:26:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:26:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:26:37 2011] Source does appear to be extended
[Fri Oct 21 08:26:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:28:29 2011] Not overwriting source region fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 08:28:29 2011] Extracting stamp from image fullrun_ccd6_acisf06115_pi14-548_cl_sm2.00.img.gz, (357, 0) - (887, 458)
[Fri Oct 21 08:28:29 2011] Writing fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 08:28:30 2011] ../../acisf06115/products/events/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.evt and ../../acisf06115/products/events/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 08:28:30 2011] Size of ../../acisf06115/products/events/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.evt.gz[events] = 581 counts
[Fri Oct 21 08:28:30 2011] Mean chipx,y = (46.87, 767.49)
[Fri Oct 21 08:28:30 2011] Mean tdetx,y = (2921.87, 2469.49)
[Fri Oct 21 08:28:30 2011] chipx,y range = (3.00-95.00, 709.00-827.00)
[Fri Oct 21 08:28:30 2011] Size of ../../acisf06115/products/events/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 519 counts
[Fri Oct 21 08:28:30 2011] ../../acisf06115/products/images/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.img and ../../acisf06115/products/images/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 08:28:30 2011] ../../acisf06115/products/spectra/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.pi and ../../acisf06115/products/spectra/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 08:28:32 2011] ../../acisf06115/products/lightcurves/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.lc and ../../acisf06115/products/lightcurves/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 08:29:22 2011] Keeping rmf generated by specextract
[Fri Oct 21 08:29:23 2011] 169.939
[Fri Oct 21 08:32:01 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:32:01 2011] Error reading totcts from fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 08:32:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:32:01 2011] Using photon index=1.80, rate=0.0138, arf fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 08:32:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:32:01 2011] Updating source flux to 1.7e-13
[Fri Oct 21 08:32:29 2011] Reading fit data from acisf06115/analysis//spectral/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct 21 08:32:29 2011] Spectral fit parameter nH value = 1.33734e+21
[Fri Oct 21 08:32:29 2011] Spectral fit parameter PhoIndex value = 1.34377
[Fri Oct 21 08:32:29 2011] Failed to get F(0.3-8.0) from acisf06115/analysis//spectral/fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 08:32:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:32:29 2011] Using Nh = 1.3e+21, photon index=1.34, rate=0.0138, arf fullrun_ccd6_acisf06115_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 08:32:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:32:29 2011] Updating source flux to 2e-13