[Fri Oct 21 08:24:24 2011] Detection parameters:
  Position = (1108.6, 895.2) = 14 4 3.23 54 8 35.6
  Extent = 7.6" x 6.9", rotation angle = 114 degrees
  Source counts = 101.8 +/- 17.4
  Background counts = 201.2
  Rate = 0.003 +/- 0.0005

[Fri Oct 21 08:24:25 2011] Off-axis axis estimate = 11.63'
[Fri Oct 21 08:25:39 2011] Using EEF radius (= 6.04 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:25:39 2011] Initial guess for spatial extent in simple fitting = 6.04"
[Fri Oct 21 08:25:39 2011] source mask rpix=12.3, npix_max = 651, mask sum = 650, frac = 0.997
[Fri Oct 21 08:25:39 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 6.04"
[Fri Oct 21 08:25:39 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 21 08:25:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 08:25:39 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 21 08:25:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 08:25:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf06115_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:25:39 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 21 08:25:39 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 21 08:25:39 2011] Fit fullrun_ccd5_acisf06115_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 21 08:25:54 2011] Spatial fit model total counts = 300.975000, observed total counts = 301.000000
[Fri Oct 21 08:25:54 2011] Offset between fit and detection position for source 3 = 3.989939 pixels
[Fri Oct 21 08:25:54 2011] 301.658000 total counts/ 165.451000 bgd. counts: snr = 10.589238
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.989939 pixels
  Position = (1109.7, 891.3) = 14 4 3.20 54 8 33.5
  Extent = 8.1 (5.7-12.1)", rotation angle = 0
  Source counts = 136.2 +/- 17.4
  Background counts = 165.5
  Rate = 0.004 +/- 0.0005
[Fri Oct 21 08:25:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:25:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:25:54 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:25:54 2011] Source does appear to be extended
[Fri Oct 21 08:25:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:26:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:26:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:26:23 2011] Initial guess for spatial extent in simple fitting = 8.11"
[Fri Oct 21 08:26:23 2011] source mask rpix=16.5, npix_max = 1153, mask sum = 1156, frac = 1.002
[Fri Oct 21 08:26:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 8.11"
[Fri Oct 21 08:26:23 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 21 08:26:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 08:26:23 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 21 08:26:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 08:26:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf06115_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:26:23 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 21 08:26:23 2011] fullrun_ccd5_acisf06115_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 21 08:26:23 2011] Fit fullrun_ccd5_acisf06115_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 21 08:26:36 2011] Spatial fit model total counts = 456.039000, observed total counts = 456.000000
[Fri Oct 21 08:26:36 2011] Offset between fit and detection position for source 3 = 1.606159 pixels
[Fri Oct 21 08:26:36 2011] 454.819000 total counts/ 332.193000 bgd. counts: snr = 6.728021
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.606159 pixels
  Position = (1110.4, 892.8) = 14 4 3.16 54 8 34.2
  Extent = 7.7 (5.9-11.3)", rotation angle = 0
  Source counts = 122.6 +/- 21.3
  Background counts = 332.2
  Rate = 0.003 +/- 0.0006
[Fri Oct 21 08:26:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:26:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:26:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:26:36 2011] Source does appear to be extended
[Fri Oct 21 08:26:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:28:16 2011] Not overwriting source region fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 08:28:16 2011] Extracting stamp from image fullrun_ccd5_acisf06115_pi14-548_cl_sm2.00.img.gz, (760, 542) - (1445, 1243)
[Fri Oct 21 08:28:16 2011] Writing fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 08:28:22 2011] ../../acisf06115/products/events/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.evt and ../../acisf06115/products/events/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 08:28:22 2011] Size of ../../acisf06115/products/events/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.evt.gz[events] = 550 counts
[Fri Oct 21 08:28:22 2011] Mean chipx,y = (885.69, 716.07)
[Fri Oct 21 08:28:22 2011] Mean tdetx,y = (2718.69, 2418.07)
[Fri Oct 21 08:28:22 2011] chipx,y range = (812.00-961.00, 643.00-795.00)
[Fri Oct 21 08:28:22 2011] Size of ../../acisf06115/products/events/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3861 counts
[Fri Oct 21 08:28:22 2011] ../../acisf06115/products/images/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.img and ../../acisf06115/products/images/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 08:28:22 2011] ../../acisf06115/products/spectra/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.pi and ../../acisf06115/products/spectra/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 08:28:25 2011] ../../acisf06115/products/lightcurves/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.lc and ../../acisf06115/products/lightcurves/fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 08:28:28 2011] Keeping rmf generated by specextract
[Fri Oct 21 08:28:28 2011] 162.639
[Fri Oct 21 08:32:01 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:32:01 2011] Error reading totcts from fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 08:32:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:32:01 2011] Using photon index=1.80, rate=0.00343, arf fullrun_ccd5_acisf06115_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 08:32:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:32:01 2011] Updating source flux to 3.1e-14