[Fri Oct 21 08:24:22 2011] Detection parameters:
  Position = (404.0, 934.8) = 14 3 0.26 54 10 3.2
  Extent = 3.5" x 2.4", rotation angle = 107 degrees
  Source counts = 26.7 +/- 6.2
  Background counts = 11.3
  Rate = 0.0007 +/- 0.0002

[Fri Oct 21 08:24:23 2011] Off-axis axis estimate = 9.32'
[Fri Oct 21 08:25:37 2011] Using EEF radius (= 3.84 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:25:37 2011] Initial guess for spatial extent in simple fitting = 3.84"
[Fri Oct 21 08:25:37 2011] source mask rpix=7.8, npix_max = 275, mask sum = 246, frac = 0.892
[Fri Oct 21 08:25:37 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.84"
[Fri Oct 21 08:25:37 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 08:25:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 08:25:37 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 08:25:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 08:25:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06115_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:25:37 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 08:25:37 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 08:25:37 2011] Fit fullrun_ccd2_acisf06115_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 08:25:51 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 44.970967 pixels away
[Fri Oct 21 08:25:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:25:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:25:51 2011] Assessing source extent using major
[Fri Oct 21 08:25:51 2011] Source does appear to be extended
[Fri Oct 21 08:25:51 2011] Computing asymmetry using major and minor axis, asym = 1.48
[Fri Oct 21 08:26:21 2011] Using EEF radius (= 3.84 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:26:21 2011] Initial guess for spatial extent in simple fitting = 3.84"
[Fri Oct 21 08:26:21 2011] source mask rpix=7.8, npix_max = 275, mask sum = 246, frac = 0.892
[Fri Oct 21 08:26:21 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.84"
[Fri Oct 21 08:26:21 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 08:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 08:26:21 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 08:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 08:26:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06115_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:26:22 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 08:26:22 2011] fullrun_ccd2_acisf06115_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 08:26:22 2011] Fit fullrun_ccd2_acisf06115_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 08:26:33 2011] Spatial fit model total counts = 50.695600, observed total counts = 51.000000
[Fri Oct 21 08:26:33 2011] Offset between fit and detection position for source 2 = 1.394909 pixels
[Fri Oct 21 08:26:33 2011] 51.081200 total counts/ 24.037600 bgd. counts: snr = 5.515933
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.394909 pixels
  Position = (404.1, 933.4) = 14 3 0.28 54 10 2.3
  Extent = 2.9 (2.0-4.5)", rotation angle = 0
  Source counts = 27.0 +/- 7.1
  Background counts = 24.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 08:26:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:26:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:26:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:26:33 2011] Source does appear to be extended
[Fri Oct 21 08:26:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:27:06 2011] Not overwriting source region fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 08:27:06 2011] Extracting stamp from image fullrun_ccd2_acisf06115_pi14-548_cl_sm2.00.img.gz, (271, 800) - (538, 1067)
[Fri Oct 21 08:27:06 2011] Writing fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 08:27:10 2011] ../../acisf06115/products/events/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.evt and ../../acisf06115/products/events/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 08:27:10 2011] Size of ../../acisf06115/products/events/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.evt.gz[events] = 42 counts
[Fri Oct 21 08:27:10 2011] Mean chipx,y = (894.48, 487.83)
[Fri Oct 21 08:27:10 2011] Mean tdetx,y = (3548.83, 3191.52)
[Fri Oct 21 08:27:10 2011] chipx,y range = (861.00-925.00, 461.00-524.00)
[Fri Oct 21 08:27:10 2011] Size of ../../acisf06115/products/events/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 162 counts
[Fri Oct 21 08:27:10 2011] ../../acisf06115/products/images/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.img and ../../acisf06115/products/images/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 08:27:10 2011] ../../acisf06115/products/spectra/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.pi and ../../acisf06115/products/spectra/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 08:27:10 2011] Not generating rmf since there are only 27 counts
[Fri Oct 21 08:27:13 2011] ../../acisf06115/products/lightcurves/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.lc and ../../acisf06115/products/lightcurves/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 08:27:39 2011] 168.071
[Fri Oct 21 08:32:00 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:32:00 2011] Error reading totcts from fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 08:32:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:32:00 2011] Using photon index=1.80, rate=0.000756, arf fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 08:32:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:32:00 2011] Updating source flux to 1e-14
[Fri Oct 21 08:32:06 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 08:32:11 2011] acisf06115/analysis//spectral/fullrun_ccd2_acisf06115_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete