[Mon Oct 24 10:21:49 2011] Detection parameters:
  Position = (644.8, 477.0) = 14 3 17.73 54 18 36.2
  Extent = 0.8" x 0.5", rotation angle = 99 degrees
  Source counts = 44.4 +/- 7.3
  Background counts = 8.6
  Rate = 0.0007 +/- 0.0001

[Mon Oct 24 10:21:51 2011] Off-axis axis estimate = 0.91'
[Mon Oct 24 10:22:58 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 10:22:58 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 24 10:22:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Mon Oct 24 10:22:58 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.38"
[Mon Oct 24 10:23:00 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26.ximg exists
[Mon Oct 24 10:23:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26.csv
[Mon Oct 24 10:23:00 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26_1.ximg exists
[Mon Oct 24 10:23:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26.csv
[Mon Oct 24 10:23:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06114_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 10:23:01 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Mon Oct 24 10:23:01 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Oct 24 10:23:01 2011] Fit fullrun_ccd7_acisf06114_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Oct 24 10:23:21 2011] Spatial fit model total counts = 52.052700, observed total counts = 51.000000
[Mon Oct 24 10:23:21 2011] Offset between fit and detection position for source 27 = 0.653857 pixels
[Mon Oct 24 10:23:21 2011] 51.356700 total counts/ 13.589600 bgd. counts: snr = 10.244961
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.653857 pixels
  Position = (645.4, 477.0) = 14 3 17.72 54 18 35.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 37.8 +/- 7.2
  Background counts = 13.6
  Rate = 0.0006 +/- 0.0001
[Mon Oct 24 10:23:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 10:23:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 10:23:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 10:23:21 2011] Source does appear to be extended
[Mon Oct 24 10:23:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 10:23:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 10:23:49 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 24 10:23:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Mon Oct 24 10:23:49 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.38"
[Mon Oct 24 10:23:51 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26.ximg exists
[Mon Oct 24 10:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26.csv
[Mon Oct 24 10:23:51 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26_1.ximg exists
[Mon Oct 24 10:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26.csv
[Mon Oct 24 10:23:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06114_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 10:23:52 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Mon Oct 24 10:23:52 2011] fullrun_ccd7_acisf06114_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Oct 24 10:23:52 2011] Fit fullrun_ccd7_acisf06114_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Oct 24 10:24:12 2011] Spatial fit model total counts = 52.753100, observed total counts = 51.000000
[Mon Oct 24 10:24:12 2011] Offset between fit and detection position for source 27 = 0.010008 pixels
[Mon Oct 24 10:24:12 2011] 52.062000 total counts/ 13.655700 bgd. counts: snr = 10.393109
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.010008 pixels
  Position = (645.4, 477.0) = 14 3 17.72 54 18 35.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 38.4 +/- 7.2
  Background counts = 13.7
  Rate = 0.0006 +/- 0.0001
[Mon Oct 24 10:24:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 10:24:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 10:24:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 10:24:12 2011] Source does appear to be extended
[Mon Oct 24 10:24:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 10:30:17 2011] Not overwriting source region fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.reg
[Mon Oct 24 10:30:17 2011] Extracting stamp from image fullrun_ccd7_acisf06114_pi14-548_cl_sm2.00.img.gz, (628, 460) - (663, 494)
[Mon Oct 24 10:30:17 2011] Writing fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27.gif
[Mon Oct 24 10:33:17 2011] ../../acisf06114/products/events/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.evt and ../../acisf06114/products/events/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon Oct 24 10:33:17 2011] Size of ../../acisf06114/products/events/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.evt.gz[events] = 40 counts
[Mon Oct 24 10:33:17 2011] Mean chipx,y = (263.82, 603.15)
[Mon Oct 24 10:33:17 2011] Mean tdetx,y = (4180.82, 2305.15)
[Mon Oct 24 10:33:17 2011] chipx,y range = (246.00-279.00, 585.00-618.00)
[Mon Oct 24 10:33:17 2011] Size of ../../acisf06114/products/events/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 22 counts
[Mon Oct 24 10:33:17 2011] ../../acisf06114/products/images/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.img and ../../acisf06114/products/images/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon Oct 24 10:33:17 2011] Not generating rmf since there are only 38 counts
[Mon Oct 24 10:33:17 2011] arf not found, will run specextract
[Mon Oct 24 10:33:19 2011] ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_bkg.pi not found
[Mon Oct 24 10:33:19 2011] ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27.warf not found
[Mon Oct 24 10:33:19 2011] ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27.wrmf not found
[Mon Oct 24 10:33:19 2011] Removal of ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27.soff failed
[Mon Oct 24 10:33:19 2011] Failed to rename ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_grp.pi to ../../acisf06114/products/spectra/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.pi
[Mon Oct 24 10:33:24 2011] ../../acisf06114/products/lightcurves/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.lc and ../../acisf06114/products/lightcurves/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Oct 24 10:38:30 2011] No arf file found
[Mon Oct 24 10:38:34 2011] Updating aperture counts using extracted products
[Mon Oct 24 10:38:34 2011] Error reading totcts from fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_src.pi
[Mon Oct 24 10:38:35 2011] No arf file for this source, not re-computing flux
[Mon Oct 24 10:38:43 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 10:38:44 2011] acisf06114/analysis//spectral/fullrun_ccd7_acisf06114_pi14-548_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete