[Mon Oct  3 05:05:55 2011] Detection parameters:
  Position = (634.2, 1060.6) = 3 29 41.74 -2 5 48.6
  Extent = 1.7" x 1.1", rotation angle = 168 degrees
  Source counts = 67.0 +/- 8.6
  Background counts = 7.0
  Rate = 0.002 +/- 0.0002

[Mon Oct  3 05:06:05 2011] Off-axis axis estimate = 7.17'
[Mon Oct  3 05:07:37 2011] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 05:07:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 05:07:37 2011] Initial guess for spatial extent in simple fitting = 2.29"
[Mon Oct  3 05:07:37 2011] source mask rpix=4.6, npix_max = 105, mask sum = 110, frac = 1.038
[Mon Oct  3 05:07:37 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.29"
[Mon Oct  3 05:07:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct  3 05:07:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3.csv
[Mon Oct  3 05:07:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct  3 05:07:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3.csv
[Mon Oct  3 05:07:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06108_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 05:07:43 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct  3 05:07:43 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct  3 05:07:43 2011] Fit fullrun_ccd3_acisf06108_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct  3 05:08:01 2011] Spatial fit model total counts = 83.588500, observed total counts = 82.000000
[Mon Oct  3 05:08:01 2011] Offset between fit and detection position for source 6 = 0.514092 pixels
[Mon Oct  3 05:08:01 2011] 84.444100 total counts/ 24.037400 bgd. counts: snr = 12.320870
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.514092 pixels
  Position = (634.2, 1061.1) = 3 29 41.76 -2 5 48.6
  Extent = 1.4 (1.2-1.7)", rotation angle = 0
  Source counts = 60.4 +/- 9.2
  Background counts = 24.0
  Rate = 0.002 +/- 0.0002
[Mon Oct  3 05:08:01 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 05:08:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 05:08:01 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 05:08:01 2011] Source does appear to be extended
[Mon Oct  3 05:08:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 05:08:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 05:08:40 2011] Initial guess for spatial extent in simple fitting = 1.43"
[Mon Oct  3 05:08:40 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Mon Oct  3 05:08:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.43"
[Mon Oct  3 05:08:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct  3 05:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3.csv
[Mon Oct  3 05:08:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct  3 05:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3.csv
[Mon Oct  3 05:08:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06108_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 05:08:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct  3 05:08:41 2011] fullrun_ccd3_acisf06108_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct  3 05:08:41 2011] Fit fullrun_ccd3_acisf06108_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct  3 05:08:57 2011] Spatial fit model total counts = 66.534700, observed total counts = 66.000000
[Mon Oct  3 05:08:57 2011] Offset between fit and detection position for source 6 = 0.332276 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.332276 pixels
  Position = (634.5, 1061.2) = 3 29 41.75 -2 5 48.6
  Extent = 1.5 (1.2-1.8)", rotation angle = 0
  Source counts = 65.6 +/- 8.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Mon Oct  3 05:08:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 05:08:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 05:08:57 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 05:08:57 2011] Source does appear to be extended
[Mon Oct  3 05:08:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 05:12:03 2011] Not overwriting source region fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.reg
[Mon Oct  3 05:12:03 2011] Extracting stamp from image fullrun_ccd3_acisf06108_pi14-548_cl_sm2.00.img.gz, (566, 993) - (703, 1129)
[Mon Oct  3 05:12:03 2011] Writing fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6.gif
[Mon Oct  3 05:12:14 2011] ../../acisf06108/products/events/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.evt and ../../acisf06108/products/events/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct  3 05:12:14 2011] Size of ../../acisf06108/products/events/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.evt.gz[events] = 74 counts
[Mon Oct  3 05:12:14 2011] Mean chipx,y = (196.61, 357.84)
[Mon Oct  3 05:12:14 2011] Mean tdetx,y = (4774.16, 3257.61)
[Mon Oct  3 05:12:14 2011] chipx,y range = (176.00-222.00, 336.00-381.00)
[Mon Oct  3 05:12:14 2011] Size of ../../acisf06108/products/events/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 67 counts
[Mon Oct  3 05:12:14 2011] ../../acisf06108/products/images/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.img and ../../acisf06108/products/images/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct  3 05:12:14 2011] ../../acisf06108/products/spectra/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.pi and ../../acisf06108/products/spectra/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct  3 05:12:14 2011] Not generating rmf since there are only 65 counts
[Mon Oct  3 05:12:17 2011] ../../acisf06108/products/lightcurves/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.lc and ../../acisf06108/products/lightcurves/fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct  3 05:12:54 2011] 170.859
[Mon Oct  3 05:13:02 2011] Updating aperture counts using extracted products
[Mon Oct  3 05:13:02 2011] Error reading totcts from fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct  3 05:13:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 05:13:02 2011] Using photon index=1.80, rate=0.00165, arf fullrun_ccd3_acisf06108_pi14-548_pass1_cl_src6.arf
[Mon Oct  3 05:13:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 05:13:02 2011] Updating source flux to 2.2e-14
[Mon Oct  3 05:13:14 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting