[Wed Oct  5 13:35:29 2011] Detection parameters:
  Position = (1118.8, 947.1) = 0 11 23.20 -15 24 2.7
  Extent = 0.7" x 0.5", rotation angle = 137 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0003 +/- 9e-05

[Wed Oct  5 13:35:30 2011] Off-axis axis estimate = 4.80'
[Wed Oct  5 13:36:51 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:51 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Wed Oct  5 13:36:51 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.997
[Wed Oct  5 13:36:51 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.10"
[Wed Oct  5 13:36:55 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass0_src20.ximg exists
[Wed Oct  5 13:36:55 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass0_src20_1.ximg exists
[Wed Oct  5 13:36:55 2011] Fit fullrun_ccd3_acisf06105_pi14-548_cl_pass0_src20 appears to have run properly
[Wed Oct  5 13:36:55 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed Oct  5 13:36:55 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Oct  5 13:36:55 2011] Fit fullrun_ccd3_acisf06105_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Oct  5 13:37:16 2011] Spatial fit model total counts = 12.971500, observed total counts = 13.000000
[Wed Oct  5 13:37:16 2011] Offset between fit and detection position for source 28 = 0.845762 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.845762 pixels
  Position = (1119.2, 947.8) = 0 11 23.20 -15 24 2.6
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 13:37:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:16 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:16 2011] Source does appear to be extended
[Wed Oct  5 13:37:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:37:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:37:39 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Oct  5 13:37:39 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Wed Oct  5 13:37:39 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.83"
[Wed Oct  5 13:37:40 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20.ximg exists
[Wed Oct  5 13:37:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20.csv
[Wed Oct  5 13:37:40 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20_1.ximg exists
[Wed Oct  5 13:37:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20.csv
[Wed Oct  5 13:37:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06105_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:41 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed Oct  5 13:37:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20.csv
[Wed Oct  5 13:37:41 2011] fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Oct  5 13:37:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20.csv
[Wed Oct  5 13:37:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06105_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:53 2011] Spatial fit model total counts = 11.647000, observed total counts = 13.000000
[Wed Oct  5 13:37:53 2011] Offset between fit and detection position for source 28 = 0.096510 pixels
[Wed Oct  5 13:37:53 2011] 12.116295 total counts/ 0.132295 bgd. counts: snr = 32.948078
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.096510 pixels
  Position = (1119.2, 947.7) = 0 11 23.20 -15 24 2.6
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.1
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 13:37:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:53 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:53 2011] Source does appear to be extended
[Wed Oct  5 13:37:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:43:29 2011] Not overwriting source region fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.reg
[Wed Oct  5 13:43:29 2011] Extracting stamp from image fullrun_ccd3_acisf06105_pi14-548_cl_sm2.00.img.gz, (1082, 910) - (1157, 985)
[Wed Oct  5 13:43:29 2011] Writing fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28.gif
[Wed Oct  5 13:45:19 2011] ../../acisf06105/products/events/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.evt and ../../acisf06105/products/events/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed Oct  5 13:45:19 2011] Size of ../../acisf06105/products/events/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.evt.gz[events] = 13 counts
[Wed Oct  5 13:45:19 2011] Mean chipx,y = (206.15, 940.08)
[Wed Oct  5 13:45:19 2011] Mean tdetx,y = (4191.92, 3267.15)
[Wed Oct  5 13:45:19 2011] chipx,y range = (188.00-223.00, 926.00-954.00)
[Wed Oct  5 13:45:19 2011] Size of ../../acisf06105/products/events/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 16 counts
[Wed Oct  5 13:45:19 2011] ../../acisf06105/products/images/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.img and ../../acisf06105/products/images/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed Oct  5 13:45:19 2011] ../../acisf06105/products/spectra/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.pi and ../../acisf06105/products/spectra/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Wed Oct  5 13:45:19 2011] Not generating rmf since there are only 11 counts
[Wed Oct  5 13:45:23 2011] ../../acisf06105/products/lightcurves/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.lc and ../../acisf06105/products/lightcurves/fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed Oct  5 13:45:26 2011] 182.807
[Wed Oct  5 13:45:40 2011] Updating aperture counts using extracted products
[Wed Oct  5 13:45:40 2011] Error reading totcts from fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28_src.pi.gz
[Wed Oct  5 13:45:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 13:45:40 2011] Using photon index=1.80, rate=0.000321, arf fullrun_ccd3_acisf06105_pi14-548_pass1_cl_src28.arf
[Wed Oct  5 13:45:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 13:45:40 2011] Updating source flux to 4e-15
[Wed Oct  5 13:45:53 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting