[Wed Oct  5 13:35:14 2011] Detection parameters:
  Position = (1055.8, 915.4) = 0 11 44.97 -15 13 11.2
  Extent = 0.9" x 0.7", rotation angle = 97 degrees
  Source counts = 23.8 +/- 5.5
  Background counts = 6.2
  Rate = 0.0006 +/- 0.0001

[Wed Oct  5 13:35:16 2011] Off-axis axis estimate = 8.66'
[Wed Oct  5 13:36:35 2011] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:36:35 2011] Initial guess for spatial extent in simple fitting = 3.31"
[Wed Oct  5 13:36:35 2011] source mask rpix=6.7, npix_max = 209, mask sum = 201, frac = 0.962
[Wed Oct  5 13:36:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.31"
[Wed Oct  5 13:36:35 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 13:36:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 13:36:35 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 13:36:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 13:36:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06105_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:36:36 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 13:36:36 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 13:36:36 2011] Fit fullrun_ccd0_acisf06105_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 13:37:09 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 39.036850 pixels away
[Wed Oct  5 13:37:09 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:09 2011] Assessing source extent using major
[Wed Oct  5 13:37:09 2011] Source does appear to be extended
[Wed Oct  5 13:37:09 2011] Computing asymmetry using major and minor axis, asym = 1.39
[Wed Oct  5 13:37:35 2011] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:37:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:37:35 2011] Initial guess for spatial extent in simple fitting = 3.31"
[Wed Oct  5 13:37:35 2011] source mask rpix=6.7, npix_max = 209, mask sum = 201, frac = 0.962
[Wed Oct  5 13:37:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.31"
[Wed Oct  5 13:37:36 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 13:37:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 13:37:36 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 13:37:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 13:37:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06105_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:37 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 13:37:37 2011] fullrun_ccd0_acisf06105_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 13:37:37 2011] Fit fullrun_ccd0_acisf06105_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 13:37:46 2011] Spatial fit model total counts = 44.747500, observed total counts = 45.000000
[Wed Oct  5 13:37:46 2011] Offset between fit and detection position for source 1 = 0.669529 pixels
[Wed Oct  5 13:37:46 2011] 45.301000 total counts/ 30.747200 bgd. counts: snr = 2.624663
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.669529 pixels
  Position = (1056.3, 915.8) = 0 11 44.97 -15 13 11.2
  Extent = 1.1 (0.8-1.6)", rotation angle = 0
  Source counts = 14.6 +/- 6.7
  Background counts = 30.7
  Rate = 0.0004 +/- 0.0002
[Wed Oct  5 13:37:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:46 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:46 2011] Source does appear to be extended
[Wed Oct  5 13:37:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:38:12 2011] Not overwriting source region fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 13:38:12 2011] Extracting stamp from image fullrun_ccd0_acisf06105_pi14-548_cl_sm2.00.img.gz, (1006, 866) - (1107, 966)
[Wed Oct  5 13:38:12 2011] Writing fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 13:38:13 2011] ../../acisf06105/products/events/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.evt and ../../acisf06105/products/events/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 13:38:13 2011] Size of ../../acisf06105/products/events/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.evt.gz[events] = 17 counts
[Wed Oct  5 13:38:13 2011] Mean chipx,y = (777.82, 133.94)
[Wed Oct  5 13:38:13 2011] Mean tdetx,y = (3194.94, 4354.18)
[Wed Oct  5 13:38:13 2011] chipx,y range = (759.00-794.00, 115.00-151.00)
[Wed Oct  5 13:38:13 2011] Size of ../../acisf06105/products/events/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 26 counts
[Wed Oct  5 13:38:13 2011] ../../acisf06105/products/images/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.img and ../../acisf06105/products/images/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 13:38:13 2011] ../../acisf06105/products/spectra/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.pi and ../../acisf06105/products/spectra/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 13:38:13 2011] Not generating rmf since there are only 14 counts
[Wed Oct  5 13:38:16 2011] ../../acisf06105/products/lightcurves/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.lc and ../../acisf06105/products/lightcurves/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 13:39:21 2011] 161.873
[Wed Oct  5 13:45:38 2011] Updating aperture counts using extracted products
[Wed Oct  5 13:45:38 2011] Error reading totcts from fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 13:45:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 13:45:39 2011] Using photon index=1.80, rate=0.00039, arf fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 13:45:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 13:45:39 2011] Updating source flux to 5.5e-15
[Wed Oct  5 13:45:44 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 13:45:48 2011] acisf06105/analysis//spectral/fullrun_ccd0_acisf06105_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete