[Wed Oct  5 09:05:04 2011] Detection parameters:
  Position = (494.1, 744.3) = 1 59 13.54 -40 45 26.2
  Extent = 0.7" x 0.5", rotation angle = 0 degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.3
  Rate = 0.001 +/- 0.0004

[Wed Oct  5 09:05:04 2011] Off-axis axis estimate = 4.70'
[Wed Oct  5 09:05:40 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 09:05:40 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Wed Oct  5 09:05:40 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Wed Oct  5 09:05:40 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.06"
[Wed Oct  5 09:05:40 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct  5 09:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 09:05:40 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct  5 09:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 09:05:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00602_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:05:40 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 09:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3.csv
[Wed Oct  5 09:05:40 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 09:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3.csv
[Wed Oct  5 09:05:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00602_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:05:44 2011] Spatial fit model total counts = 15.862000, observed total counts = 18.000000
[Wed Oct  5 09:05:44 2011] Offset between fit and detection position for source 1 = 0.773727 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.773727 pixels
  Position = (494.9, 744.1) = 1 59 13.53 -40 45 26.5
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Wed Oct  5 09:05:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 09:05:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 09:05:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 09:05:44 2011] Source does appear to be extended
[Wed Oct  5 09:05:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 09:06:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 09:06:01 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Oct  5 09:06:01 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Wed Oct  5 09:06:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.02"
[Wed Oct  5 09:06:01 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct  5 09:06:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 09:06:01 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct  5 09:06:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 09:06:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00602_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:06:01 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 09:06:01 2011] fullrun_ccd6_acisf00602_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 09:06:01 2011] Fit fullrun_ccd6_acisf00602_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 09:06:05 2011] Spatial fit model total counts = 17.808900, observed total counts = 18.000000
[Wed Oct  5 09:06:05 2011] Offset between fit and detection position for source 1 = 0.322724 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.322724 pixels
  Position = (495.0, 743.9) = 1 59 13.53 -40 45 26.7
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 18.3 +/- 4.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Wed Oct  5 09:06:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 09:06:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 09:06:05 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 09:06:05 2011] Source does appear to be extended
[Wed Oct  5 09:06:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 09:06:33 2011] Not overwriting source region fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 09:06:33 2011] Extracting stamp from image fullrun_ccd6_acisf00602_pi14-548_cl_sm2.00.img.gz, (447, 696) - (543, 792)
[Wed Oct  5 09:06:33 2011] Writing fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 09:06:46 2011] ../../acisf00602/products/events/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.evt and ../../acisf00602/products/events/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 09:06:46 2011] Size of ../../acisf00602/products/events/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18 counts
[Wed Oct  5 09:06:46 2011] Mean chipx,y = (685.89, 463.56)
[Wed Oct  5 09:06:46 2011] Mean tdetx,y = (3560.89, 2165.56)
[Wed Oct  5 09:06:46 2011] chipx,y range = (672.00-707.00, 448.00-480.00)
[Wed Oct  5 09:06:46 2011] Size of ../../acisf00602/products/events/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Wed Oct  5 09:06:46 2011] ../../acisf00602/products/images/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.img and ../../acisf00602/products/images/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 09:06:46 2011] ../../acisf00602/products/spectra/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.pi and ../../acisf00602/products/spectra/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 09:06:46 2011] Not generating rmf since there are only 18 counts
[Wed Oct  5 09:06:55 2011] ../../acisf00602/products/lightcurves/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.lc and ../../acisf00602/products/lightcurves/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 09:07:18 2011] 199.198
[Wed Oct  5 09:08:24 2011] Updating aperture counts using extracted products
[Wed Oct  5 09:08:24 2011] Error reading totcts from fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 09:08:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 09:08:24 2011] Using photon index=1.80, rate=0.00205, arf fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 09:08:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 09:08:24 2011] Updating source flux to 1.9e-14
[Wed Oct  5 09:08:31 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 09:08:32 2011] acisf00602/analysis//spectral/fullrun_ccd6_acisf00602_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete