[Thu Oct 27 07:40:15 2011] Detection parameters:
  Position = (838.3, 172.1) = 17 45 44.47 -28 59 35.7
  Extent = 1.6" x 0.7", rotation angle = 111 degrees
  Source counts = 114.1 +/- 13.3
  Background counts = 61.9
  Rate = 0.003 +/- 0.0003

[Thu Oct 27 07:40:20 2011] Off-axis axis estimate = 1.55'
[Thu Oct 27 07:42:03 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:42:03 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Oct 27 07:42:03 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.883
[Thu Oct 27 07:42:03 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.40"
[Thu Oct 27 07:42:04 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11.ximg exists
[Thu Oct 27 07:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11.csv
[Thu Oct 27 07:42:04 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Oct 27 07:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11.csv
[Thu Oct 27 07:42:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05951_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:42:06 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Oct 27 07:42:06 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Oct 27 07:42:06 2011] Fit fullrun_ccd3_acisf05951_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Oct 27 07:42:41 2011] Spatial fit model total counts = 213.998000, observed total counts = 214.000000
[Thu Oct 27 07:42:41 2011] Offset between fit and detection position for source 12 = 0.824457 pixels
[Thu Oct 27 07:42:41 2011] 217.863000 total counts/ 157.814000 bgd. counts: snr = 4.780056
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.824457 pixels
  Position = (838.9, 172.6) = 17 45 44.47 -28 59 35.7
  Extent = 0.7 (0.6-1.1)", rotation angle = 0
  Source counts = 60.0 +/- 14.8
  Background counts = 157.8
  Rate = 0.001 +/- 0.0003
[Thu Oct 27 07:42:41 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:42:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:42:41 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:42:41 2011] Source does appear to be extended
[Thu Oct 27 07:42:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:43:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:43:09 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Oct 27 07:43:09 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Thu Oct 27 07:43:09 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.75"
[Thu Oct 27 07:43:11 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10.ximg exists
[Thu Oct 27 07:43:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10.csv
[Thu Oct 27 07:43:11 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Oct 27 07:43:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10.csv
[Thu Oct 27 07:43:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05951_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:43:12 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Oct 27 07:43:12 2011] fullrun_ccd3_acisf05951_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Oct 27 07:43:12 2011] Fit fullrun_ccd3_acisf05951_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Oct 27 07:43:41 2011] Spatial fit model total counts = 208.111000, observed total counts = 209.000000
[Thu Oct 27 07:43:41 2011] Offset between fit and detection position for source 12 = 0.087328 pixels
[Thu Oct 27 07:43:41 2011] 209.856400 total counts/ 141.207000 bgd. counts: snr = 5.777083
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.087328 pixels
  Position = (838.9, 172.7) = 17 45 44.47 -28 59 35.7
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 68.6 +/- 14.5
  Background counts = 141.2
  Rate = 0.002 +/- 0.0003
[Thu Oct 27 07:43:41 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:43:41 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:43:41 2011] Source does appear to be extended
[Thu Oct 27 07:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:48:12 2011] Not overwriting source region fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.reg
[Thu Oct 27 07:48:12 2011] Extracting stamp from image fullrun_ccd3_acisf05951_pi14-548_cl_sm2.00.img.gz, (800, 134) - (878, 212)
[Thu Oct 27 07:48:12 2011] Writing fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12.gif
[Thu Oct 27 07:48:42 2011] ../../acisf05951/products/events/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.evt and ../../acisf05951/products/events/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Oct 27 07:48:42 2011] Size of ../../acisf05951/products/events/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.evt.gz[events] = 166 counts
[Thu Oct 27 07:48:42 2011] Mean chipx,y = (818.81, 885.13)
[Thu Oct 27 07:48:42 2011] Mean tdetx,y = (4246.87, 3879.81)
[Thu Oct 27 07:48:42 2011] chipx,y range = (798.00-841.00, 864.00-908.00)
[Thu Oct 27 07:48:42 2011] Size of ../../acisf05951/products/events/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 756 counts
[Thu Oct 27 07:48:42 2011] ../../acisf05951/products/images/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.img and ../../acisf05951/products/images/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Oct 27 07:48:42 2011] ../../acisf05951/products/spectra/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.pi and ../../acisf05951/products/spectra/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Oct 27 07:48:42 2011] Not generating rmf since there are only 68 counts
[Thu Oct 27 07:48:44 2011] ../../acisf05951/products/lightcurves/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.lc and ../../acisf05951/products/lightcurves/fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Oct 27 07:51:23 2011] 201.467
[Thu Oct 27 07:51:32 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:51:32 2011] Error reading totcts from fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Oct 27 07:51:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:51:33 2011] Using photon index=1.80, rate=0.00154, arf fullrun_ccd3_acisf05951_pi14-548_pass1_cl_src12.arf
[Thu Oct 27 07:51:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:51:33 2011] Updating source flux to 2.4e-14
[Thu Oct 27 07:52:10 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting