[Thu Oct 27 07:40:08 2011] Detection parameters:
  Position = (927.4, 852.6) = 17 45 2.35 -28 54 50.2
  Extent = 3.9" x 3.0", rotation angle = 165 degrees
  Source counts = 23000.4 +/- 162.9
  Background counts = 3550.6
  Rate = 0.5 +/- 0.004

[Thu Oct 27 07:40:11 2011] Off-axis axis estimate = 10.06'
[Thu Oct 27 07:41:58 2011] Using EEF radius (= 4.48 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:41:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:41:58 2011] Initial guess for spatial extent in simple fitting = 4.48"
[Thu Oct 27 07:41:58 2011] source mask rpix=9.1, npix_max = 369, mask sum = 361, frac = 0.978
[Thu Oct 27 07:41:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.48"
[Thu Oct 27 07:41:59 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 07:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:41:59 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 07:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05951_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:42:00 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 07:42:00 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:42:00 2011] Fit fullrun_ccd1_acisf05951_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:42:26 2011] Spatial fit model total counts = 27392.000000, observed total counts = 27392.000000
[Thu Oct 27 07:42:26 2011] Offset between fit and detection position for source 1 = 0.640162 pixels
[Thu Oct 27 07:42:26 2011] 27392.170000 total counts/ 1893.170000 bgd. counts: snr = 586.041461
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.640162 pixels
  Position = (927.8, 853.1) = 17 45 2.35 -28 54 50.2
  Extent = 4.7 (4.7-4.7)", rotation angle = 0
  Source counts = 25499.0 +/- 165.5
  Background counts = 1893.2
  Rate = 0.6 +/- 0.004
[Thu Oct 27 07:42:26 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:42:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:42:26 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:42:26 2011] Source does appear to be extended
[Thu Oct 27 07:42:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:43:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:43:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:43:05 2011] Initial guess for spatial extent in simple fitting = 4.71"
[Thu Oct 27 07:43:05 2011] source mask rpix=9.6, npix_max = 406, mask sum = 400, frac = 0.984
[Thu Oct 27 07:43:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.71"
[Thu Oct 27 07:43:06 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 07:43:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:43:06 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 07:43:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:43:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05951_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:43:06 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 07:43:06 2011] fullrun_ccd1_acisf05951_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:43:06 2011] Fit fullrun_ccd1_acisf05951_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:43:28 2011] Spatial fit model total counts = 27575.000000, observed total counts = 27575.000000
[Thu Oct 27 07:43:28 2011] Offset between fit and detection position for source 1 = 0.025357 pixels
[Thu Oct 27 07:43:28 2011] 27572.280000 total counts/ 1830.380000 bgd. counts: snr = 601.686085
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025357 pixels
  Position = (927.8, 853.1) = 17 45 2.35 -28 54 50.2
  Extent = 4.8 (4.8-4.8)", rotation angle = 0
  Source counts = 25741.9 +/- 166.0
  Background counts = 1830.4
  Rate = 0.6 +/- 0.004
[Thu Oct 27 07:43:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:43:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:43:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:43:28 2011] Source does appear to be extended
[Thu Oct 27 07:43:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:45:43 2011] Not overwriting source region fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 27 07:45:43 2011] Extracting stamp from image fullrun_ccd1_acisf05951_pi14-548_cl_sm2.00.img.gz, (707, 632) - (1149, 1074)
[Thu Oct 27 07:45:43 2011] Writing fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1.gif
[Thu Oct 27 07:45:44 2011] ../../acisf05951/products/events/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.evt and ../../acisf05951/products/events/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 27 07:45:44 2011] Size of ../../acisf05951/products/events/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.evt.gz[events] = 27275 counts
[Thu Oct 27 07:45:44 2011] Mean chipx,y = (833.17, 189.15)
[Thu Oct 27 07:45:44 2011] Mean tdetx,y = (4942.85, 4940.17)
[Thu Oct 27 07:45:44 2011] chipx,y range = (778.00-888.00, 135.00-244.00)
[Thu Oct 27 07:45:44 2011] Size of ../../acisf05951/products/events/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6151 counts
[Thu Oct 27 07:45:44 2011] ../../acisf05951/products/images/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.img and ../../acisf05951/products/images/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 27 07:45:44 2011] ../../acisf05951/products/spectra/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.pi and ../../acisf05951/products/spectra/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 27 07:45:47 2011] ../../acisf05951/products/lightcurves/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.lc and ../../acisf05951/products/lightcurves/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 27 07:46:26 2011] Keeping rmf generated by specextract
[Thu Oct 27 07:46:26 2011] 165.563
[Thu Oct 27 07:51:31 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:51:31 2011] Error reading totcts from fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 27 07:51:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:51:31 2011] Using photon index=1.80, rate=0.577, arf fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:51:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:51:31 2011] Updating source flux to 1e-11
[Thu Oct 27 07:52:04 2011] Reading fit data from acisf05951/analysis//spectral/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 27 07:52:04 2011] Spectral fit parameter nH value = 1.07664e+23
[Thu Oct 27 07:52:04 2011] Spectral fit parameter PhoIndex value = 1.73986
[Thu Oct 27 07:52:04 2011] Failed to get F(0.3-8.0) from acisf05951/analysis//spectral/fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 07:52:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:52:04 2011] Using Nh = 1.1e+23, photon index=1.74, rate=0.577, arf fullrun_ccd1_acisf05951_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:52:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:52:04 2011] Updating source flux to 2.1e-11