[Fri Oct 21 17:12:32 2011] Detection parameters:
  Position = (364.0, 1024.2) = 17 45 27.85 -29 2 4.8
  Extent = 0.8" x 0.8", rotation angle = 65 degrees
  Source counts = 18.7 +/- 4.9
  Background counts = 5.3
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 17:12:33 2011] Off-axis axis estimate = 2.91'
[Fri Oct 21 17:14:38 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:14:38 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 21 17:14:38 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.112
[Fri Oct 21 17:14:38 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.56"
[Fri Oct 21 17:14:40 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31.ximg exists
[Fri Oct 21 17:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31.csv
[Fri Oct 21 17:14:40 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31_1.ximg exists
[Fri Oct 21 17:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31.csv
[Fri Oct 21 17:14:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:14:42 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Fri Oct 21 17:14:42 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Oct 21 17:14:42 2011] Fit fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Oct 21 17:15:05 2011] Spatial fit model total counts = 35.872100, observed total counts = 35.000000
[Fri Oct 21 17:15:05 2011] Offset between fit and detection position for source 40 = 0.715114 pixels
[Fri Oct 21 17:15:05 2011] 35.740000 total counts/ 19.803900 bgd. counts: snr = 3.581019
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.715114 pixels
  Position = (364.5, 1024.6) = 17 45 27.85 -29 2 4.8
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 15.9 +/- 6.0
  Background counts = 19.8
  Rate = 0.0003 +/- 0.0001
[Fri Oct 21 17:15:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:15:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:15:05 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:15:05 2011] Source does appear to be extended
[Fri Oct 21 17:15:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 17:15:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:15:50 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Oct 21 17:15:50 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri Oct 21 17:15:50 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.75"
[Fri Oct 21 17:15:53 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29.ximg exists
[Fri Oct 21 17:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29.csv
[Fri Oct 21 17:15:53 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Oct 21 17:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29.csv
[Fri Oct 21 17:15:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:15:54 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Oct 21 17:15:54 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Oct 21 17:15:54 2011] Fit fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Oct 21 17:16:19 2011] Spatial fit model total counts = 35.891100, observed total counts = 35.000000
[Fri Oct 21 17:16:19 2011] Offset between fit and detection position for source 40 = 0.009247 pixels
[Fri Oct 21 17:16:19 2011] 35.763100 total counts/ 19.866400 bgd. counts: snr = 3.566542
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.009247 pixels
  Position = (364.6, 1024.6) = 17 45 27.84 -29 2 4.8
  Extent = 0.7 (0.5-1.4)", rotation angle = 0
  Source counts = 15.9 +/- 6.0
  Background counts = 19.9
  Rate = 0.0003 +/- 0.0001
[Fri Oct 21 17:16:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:16:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:16:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:16:19 2011] Source does appear to be extended
[Fri Oct 21 17:16:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 17:17:02 2011] Not overwriting source region fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.reg
[Fri Oct 21 17:17:02 2011] Extracting stamp from image fullrun_ccd0_acisf05950_pi14-548_cl_sm2.00.img.gz, (331, 991) - (399, 1059)
[Fri Oct 21 17:17:02 2011] Writing fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40.gif
[Fri Oct 21 17:18:32 2011] ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.evt and ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Fri Oct 21 17:18:32 2011] Size of ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.evt.gz[events] = 25 counts
[Fri Oct 21 17:18:32 2011] Mean chipx,y = (780.04, 930.60)
[Fri Oct 21 17:18:32 2011] Mean tdetx,y = (3991.60, 4351.96)
[Fri Oct 21 17:18:32 2011] chipx,y range = (759.00-794.00, 915.00-953.00)
[Fri Oct 21 17:18:32 2011] Size of ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 80 counts
[Fri Oct 21 17:18:32 2011] ../../acisf05950/products/images/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.img and ../../acisf05950/products/images/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Fri Oct 21 17:18:32 2011] ../../acisf05950/products/spectra/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.pi and ../../acisf05950/products/spectra/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Fri Oct 21 17:18:32 2011] Not generating rmf since there are only 15 counts
[Fri Oct 21 17:18:35 2011] ../../acisf05950/products/lightcurves/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.lc and ../../acisf05950/products/lightcurves/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Fri Oct 21 17:19:10 2011] 190.609
[Fri Oct 21 17:25:20 2011] Updating aperture counts using extracted products
[Fri Oct 21 17:25:20 2011] Error reading totcts from fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40_src.pi.gz
[Fri Oct 21 17:25:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 17:25:21 2011] Using photon index=1.80, rate=0.000328, arf fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src40.arf
[Fri Oct 21 17:25:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 17:25:21 2011] Updating source flux to 5.3e-15
[Fri Oct 21 17:25:29 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting