[Fri Oct 21 17:12:28 2011] Detection parameters:
  Position = (184.7, 1032.2) = 17 45 34.57 -29 2 0.9
  Extent = 0.6" x 0.5", rotation angle = 145 degrees
  Source counts = 67.6 +/- 8.7
  Background counts = 7.4
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 17:12:33 2011] Off-axis axis estimate = 1.69'
[Fri Oct 21 17:14:38 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:14:38 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 21 17:14:38 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.289
[Fri Oct 21 17:14:38 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.40"
[Fri Oct 21 17:14:40 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14.ximg exists
[Fri Oct 21 17:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14.csv
[Fri Oct 21 17:14:40 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Oct 21 17:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14.csv
[Fri Oct 21 17:14:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05950_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:14:41 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Oct 21 17:14:41 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Oct 21 17:14:41 2011] Fit fullrun_ccd0_acisf05950_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Oct 21 17:15:05 2011] Spatial fit model total counts = 86.203800, observed total counts = 84.000000
[Fri Oct 21 17:15:05 2011] Offset between fit and detection position for source 17 = 0.682504 pixels
[Fri Oct 21 17:15:05 2011] 86.516100 total counts/ 22.330000 bgd. counts: snr = 13.583029
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.682504 pixels
  Position = (185.3, 1032.6) = 17 45 34.57 -29 2 0.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 64.2 +/- 9.3
  Background counts = 22.3
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 17:15:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:15:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:15:05 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:15:05 2011] Source does appear to be extended
[Fri Oct 21 17:15:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 17:15:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:15:50 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Oct 21 17:15:50 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Fri Oct 21 17:15:50 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.53"
[Fri Oct 21 17:15:51 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 21 17:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 17:15:52 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 21 17:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 17:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05950_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:15:54 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 21 17:15:54 2011] fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 21 17:15:54 2011] Fit fullrun_ccd0_acisf05950_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 21 17:16:19 2011] Spatial fit model total counts = 86.217300, observed total counts = 84.000000
[Fri Oct 21 17:16:19 2011] Offset between fit and detection position for source 17 = 0.001037 pixels
[Fri Oct 21 17:16:19 2011] 86.529800 total counts/ 22.406200 bgd. counts: snr = 13.546709
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.001037 pixels
  Position = (185.3, 1032.6) = 17 45 34.57 -29 2 0.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 64.1 +/- 9.3
  Background counts = 22.4
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 17:16:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:16:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:16:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:16:19 2011] Source does appear to be extended
[Fri Oct 21 17:16:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 17:17:02 2011] Not overwriting source region fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.reg
[Fri Oct 21 17:17:02 2011] Extracting stamp from image fullrun_ccd0_acisf05950_pi14-548_cl_sm2.00.img.gz, (161, 1009) - (209, 1057)
[Fri Oct 21 17:17:02 2011] Writing fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17.gif
[Fri Oct 21 17:17:39 2011] ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.evt and ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Fri Oct 21 17:17:39 2011] Size of ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.evt.gz[events] = 69 counts
[Fri Oct 21 17:17:39 2011] Mean chipx,y = (955.78, 920.86)
[Fri Oct 21 17:17:39 2011] Mean tdetx,y = (3981.86, 4176.22)
[Fri Oct 21 17:17:39 2011] chipx,y range = (938.00-973.00, 904.00-940.00)
[Fri Oct 21 17:17:39 2011] Size of ../../acisf05950/products/events/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 60 counts
[Fri Oct 21 17:17:39 2011] ../../acisf05950/products/images/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.img and ../../acisf05950/products/images/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Fri Oct 21 17:17:39 2011] ../../acisf05950/products/spectra/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.pi and ../../acisf05950/products/spectra/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Fri Oct 21 17:17:39 2011] Not generating rmf since there are only 64 counts
[Fri Oct 21 17:17:42 2011] ../../acisf05950/products/lightcurves/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.lc and ../../acisf05950/products/lightcurves/fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Fri Oct 21 17:19:09 2011] 189.971
[Fri Oct 21 17:25:20 2011] Updating aperture counts using extracted products
[Fri Oct 21 17:25:20 2011] Error reading totcts from fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Oct 21 17:25:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 17:25:21 2011] Using photon index=1.80, rate=0.00132, arf fullrun_ccd0_acisf05950_pi14-548_pass1_cl_src17.arf
[Fri Oct 21 17:25:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 17:25:21 2011] Updating source flux to 2.2e-14
[Fri Oct 21 17:25:29 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting