[Tue Apr 10 15:00:57 2012] Detection parameters:
  Position = (537.8, 802.8) = 9 55 35.48 69 6 38.0
  Extent = 0.7" x 0.6", rotation angle = 16 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.001 +/- 0.0003

[Tue Apr 10 15:00:58 2012] Off-axis axis estimate = 3.27'
[Tue Apr 10 15:01:37 2012] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:01:37 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Apr 10 15:01:37 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Tue Apr 10 15:01:37 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 0.64"
[Tue Apr 10 15:01:40 2012] fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42.ximg exists
[Tue Apr 10 15:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42.csv
[Tue Apr 10 15:01:40 2012] fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42_1.ximg exists
[Tue Apr 10 15:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42.csv
[Tue Apr 10 15:01:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05945_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:01:41 2012] fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Tue Apr 10 15:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42.csv
[Tue Apr 10 15:01:41 2012] fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Apr 10 15:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42.csv
[Tue Apr 10 15:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05945_pi14-548_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:01:54 2012] Spatial fit model total counts = 14.365700, observed total counts = 16.000000
[Tue Apr 10 15:01:54 2012] Offset between fit and detection position for source 49 = 0.766117 pixels
[Tue Apr 10 15:01:54 2012] 14.893670 total counts/ 5.202140 bgd. counts: snr = 4.249143
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.766117 pixels
  Position = (537.9, 803.6) = 9 55 35.51 69 6 38.1
  Extent = 0.8 (0.2-1.3)", rotation angle = 0
  Source counts = 9.7 +/- 3.9
  Background counts = 5.2
  Rate = 0.0008 +/- 0.0003
[Tue Apr 10 15:01:54 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:01:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:01:54 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:01:54 2012] Source does appear to be extended
[Tue Apr 10 15:01:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:01:54 2012] Deleting source due to low Poisson probability 1.0