[Wed Sep 28 20:31:16 2011] Detection parameters:
  Position = (866.9, 1154.3) = 12 25 12.06 13 15 6.1
  Extent = 0.5" x 0.5", rotation angle = 119 degrees
  Source counts = 16.6 +/- 4.2
  Background counts = 1.4
  Rate = 0.0005 +/- 0.0001

[Wed Sep 28 20:31:17 2011] Off-axis axis estimate = 1.50'
[Wed Sep 28 20:32:10 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:10 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Sep 28 20:32:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.890
[Wed Sep 28 20:32:10 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.39"
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11.ximg exists
[Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11.csv
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11.csv
[Wed Sep 28 20:32:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Sep 28 20:32:11 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Sep 28 20:32:20 2011] Spatial fit model total counts = 21.900200, observed total counts = 22.000000
[Wed Sep 28 20:32:20 2011] Offset between fit and detection position for source 9 = 0.787639 pixels
[Wed Sep 28 20:32:20 2011] 22.049260 total counts/ 6.755160 bgd. counts: snr = 5.884453
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.787639 pixels
  Position = (867.6, 1154.7) = 12 25 12.05 13 15 6.0
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 15.3 +/- 4.7
  Background counts = 6.8
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 20:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:20 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:20 2011] Source does appear to be extended
[Wed Sep 28 20:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:32:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:39 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Sep 28 20:32:39 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.102
[Wed Sep 28 20:32:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.46"
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11.ximg exists
[Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 20:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Sep 28 20:32:40 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Sep 28 20:32:49 2011] Spatial fit model total counts = 21.901400, observed total counts = 22.000000
[Wed Sep 28 20:32:49 2011] Offset between fit and detection position for source 9 = 0.012353 pixels
[Wed Sep 28 20:32:49 2011] 22.045970 total counts/ 6.643670 bgd. counts: snr = 5.975600
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.012353 pixels
  Position = (867.6, 1154.7) = 12 25 12.05 13 15 6.0
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 15.4 +/- 4.7
  Background counts = 6.6
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 20:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:49 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:49 2011] Source does appear to be extended
[Wed Sep 28 20:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:35:15 2011] Not overwriting source region fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.reg
[Wed Sep 28 20:35:15 2011] Extracting stamp from image fullrun_ccd3_acisf05913_pi14-548_cl_sm2.00.img.gz, (845, 1133) - (890, 1177)
[Wed Sep 28 20:35:15 2011] Writing fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9.gif
[Wed Sep 28 20:35:49 2011] ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.evt and ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Wed Sep 28 20:35:49 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.evt.gz[events] = 17 counts
[Wed Sep 28 20:35:49 2011] Mean chipx,y = (824.76, 894.59)
[Wed Sep 28 20:35:49 2011] Mean tdetx,y = (4237.41, 3885.76)
[Wed Sep 28 20:35:49 2011] chipx,y range = (805.00-839.00, 877.00-907.00)
[Wed Sep 28 20:35:49 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 13 counts
[Wed Sep 28 20:35:49 2011] ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.img and ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Wed Sep 28 20:35:49 2011] ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.pi and ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Wed Sep 28 20:35:49 2011] Not generating rmf since there are only 15 counts
[Wed Sep 28 20:35:53 2011] ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.lc and ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Wed Sep 28 20:36:02 2011] 200.787
[Wed Sep 28 20:36:10 2011] Updating aperture counts using extracted products
[Wed Sep 28 20:36:10 2011] Error reading totcts from fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9_src.pi.gz
[Wed Sep 28 20:36:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 20:36:10 2011] Using photon index=1.80, rate=0.000432, arf fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src9.arf
[Wed Sep 28 20:36:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 20:36:10 2011] Updating source flux to 4.8e-15
[Wed Sep 28 20:36:25 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting