[Wed Sep 28 20:31:16 2011] Detection parameters:
  Position = (1151.7, 843.6) = 12 25 2.46 13 12 33.2
  Extent = 0.6" x 0.5", rotation angle = 60 degrees
  Source counts = 33.0 +/- 5.9
  Background counts = 2.0
  Rate = 0.0009 +/- 0.0002

[Wed Sep 28 20:31:17 2011] Off-axis axis estimate = 4.56'
[Wed Sep 28 20:32:10 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:10 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Sep 28 20:32:10 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.951
[Wed Sep 28 20:32:10 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.02"
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5.ximg exists
[Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 20:32:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Sep 28 20:32:11 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Sep 28 20:32:20 2011] Spatial fit model total counts = 38.240000, observed total counts = 39.000000
[Wed Sep 28 20:32:20 2011] Offset between fit and detection position for source 2 = 0.480511 pixels
[Wed Sep 28 20:32:20 2011] 38.469470 total counts/ 3.397170 bgd. counts: snr = 19.028546
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.480511 pixels
  Position = (1151.8, 844.1) = 12 25 2.47 13 12 33.2
  Extent = 1.1 (0.6-1.4)", rotation angle = 0
  Source counts = 35.1 +/- 6.2
  Background counts = 3.4
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 20:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:20 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:20 2011] Source does appear to be extended
[Wed Sep 28 20:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:32:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:39 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Wed Sep 28 20:32:39 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.015
[Wed Sep 28 20:32:39 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.09"
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5.ximg exists
[Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 20:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Sep 28 20:32:40 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Sep 28 20:32:49 2011] Spatial fit model total counts = 38.098600, observed total counts = 39.000000
[Wed Sep 28 20:32:49 2011] Offset between fit and detection position for source 2 = 0.030909 pixels
[Wed Sep 28 20:32:49 2011] 38.389533 total counts/ 0.822633 bgd. counts: snr = 41.419256
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.030909 pixels
  Position = (1151.8, 844.1) = 12 25 2.47 13 12 33.2
  Extent = 1.1 (0.8-1.3)", rotation angle = 0
  Source counts = 37.6 +/- 6.2
  Background counts = 0.8
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 20:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:49 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:49 2011] Source does appear to be extended
[Wed Sep 28 20:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:35:15 2011] Not overwriting source region fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 20:35:15 2011] Extracting stamp from image fullrun_ccd3_acisf05913_pi14-548_cl_sm2.00.img.gz, (1099, 792) - (1204, 897)
[Wed Sep 28 20:35:15 2011] Writing fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 20:35:31 2011] ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.evt and ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 20:35:31 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.evt.gz[events] = 40 counts
[Wed Sep 28 20:35:31 2011] Mean chipx,y = (406.52, 976.40)
[Wed Sep 28 20:35:31 2011] Mean tdetx,y = (4155.60, 3467.53)
[Wed Sep 28 20:35:31 2011] chipx,y range = (387.00-426.00, 957.00-995.00)
[Wed Sep 28 20:35:31 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 50 counts
[Wed Sep 28 20:35:31 2011] ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.img and ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 20:35:31 2011] ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.pi and ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 20:35:31 2011] Not generating rmf since there are only 37 counts
[Wed Sep 28 20:35:34 2011] ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.lc and ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 20:36:02 2011] 184.103
[Wed Sep 28 20:36:10 2011] Updating aperture counts using extracted products
[Wed Sep 28 20:36:10 2011] Error reading totcts from fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 20:36:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 20:36:10 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 20:36:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 20:36:10 2011] Updating source flux to 1.3e-14
[Wed Sep 28 20:36:25 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting