[Wed Sep 28 20:31:16 2011] Detection parameters: Position = (651.2, 654.5) = 12 25 19.32 13 11 0.1 Extent = 1.1" x 0.7", rotation angle = 174 degrees Source counts = 130.5 +/- 11.7 Background counts = 5.5 Rate = 0.004 +/- 0.0003 [Wed Sep 28 20:31:17 2011] Off-axis axis estimate = 5.93' [Wed Sep 28 20:32:10 2011] Using EEF radius (= 1.59 ")to estimate initial spatial extent for simple fitting [Wed Sep 28 20:32:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 28 20:32:10 2011] Initial guess for spatial extent in simple fitting = 1.59" [Wed Sep 28 20:32:10 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001 [Wed Sep 28 20:32:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.59" [Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1.ximg exists [Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1.csv [Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1_1.ximg exists [Wed Sep 28 20:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1.csv [Wed Sep 28 20:32:11 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Sep 28 20:32:11 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Sep 28 20:32:11 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Sep 28 20:32:20 2011] Spatial fit model total counts = 149.218000, observed total counts = 150.000000 [Wed Sep 28 20:32:20 2011] Offset between fit and detection position for source 1 = 0.651510 pixels [Wed Sep 28 20:32:20 2011] 150.196500 total counts/ 22.750500 bgd. counts: snr = 26.719648 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.651510 pixels Position = (651.7, 654.8) = 12 25 19.32 13 11 0.1 Extent = 1.2 (1.0-1.3)", rotation angle = 0 Source counts = 127.4 +/- 12.3 Background counts = 22.8 Rate = 0.004 +/- 0.0003 [Wed Sep 28 20:32:20 2011] Vigneting correction estimate = 1.000000 [Wed Sep 28 20:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 28 20:32:20 2011] Assessing source extent using major axis lower bound [Wed Sep 28 20:32:20 2011] Source does appear to be extended [Wed Sep 28 20:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 28 20:32:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 28 20:32:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 28 20:32:39 2011] Initial guess for spatial extent in simple fitting = 1.16" [Wed Sep 28 20:32:39 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.101 [Wed Sep 28 20:32:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.16" [Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1.ximg exists [Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1.csv [Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1_1.ximg exists [Wed Sep 28 20:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1.csv [Wed Sep 28 20:32:40 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf05913_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Sep 28 20:32:40 2011] fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Sep 28 20:32:40 2011] Fit fullrun_ccd3_acisf05913_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Wed Sep 28 20:32:49 2011] Spatial fit model total counts = 140.812000, observed total counts = 140.000000 [Wed Sep 28 20:32:49 2011] Offset between fit and detection position for source 1 = 0.028331 pixels [Wed Sep 28 20:32:49 2011] 141.436700 total counts/ 16.298700 bgd. counts: snr = 30.996505 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.028331 pixels Position = (651.7, 654.8) = 12 25 19.32 13 11 0.1 Extent = 1.2 (1.0-1.3)", rotation angle = 0 Source counts = 125.1 +/- 11.9 Background counts = 16.3 Rate = 0.004 +/- 0.0003 [Wed Sep 28 20:32:49 2011] Vigneting correction estimate = 1.000000 [Wed Sep 28 20:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 28 20:32:49 2011] Assessing source extent using major axis lower bound [Wed Sep 28 20:32:49 2011] Source does appear to be extended [Wed Sep 28 20:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 28 20:35:15 2011] Not overwriting source region fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.reg [Wed Sep 28 20:35:15 2011] Extracting stamp from image fullrun_ccd3_acisf05913_pi14-548_cl_sm2.00.img.gz, (599, 602) - (704, 707) [Wed Sep 28 20:35:15 2011] Writing fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1.gif [Wed Sep 28 20:35:16 2011] ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.evt and ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Wed Sep 28 20:35:16 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.evt.gz[events] = 138 counts [Wed Sep 28 20:35:16 2011] Mean chipx,y = (501.34, 449.14) [Wed Sep 28 20:35:16 2011] Mean tdetx,y = (4682.86, 3562.34) [Wed Sep 28 20:35:16 2011] chipx,y range = (480.00-525.00, 428.00-472.00) [Wed Sep 28 20:35:16 2011] Size of ../../acisf05913/products/events/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 61 counts [Wed Sep 28 20:35:16 2011] ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.img and ../../acisf05913/products/images/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Wed Sep 28 20:35:16 2011] ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.pi and ../../acisf05913/products/spectra/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Wed Sep 28 20:35:22 2011] ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.lc and ../../acisf05913/products/lightcurves/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Wed Sep 28 20:36:02 2011] Keeping rmf generated by specextract [Wed Sep 28 20:36:02 2011] 178.729 [Wed Sep 28 20:36:10 2011] Updating aperture counts using extracted products [Wed Sep 28 20:36:10 2011] Error reading totcts from fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_src.pi.gz [Wed Sep 28 20:36:10 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 28 20:36:10 2011] Using photon index=1.80, rate=0.00351, arf fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1.arf [Wed Sep 28 20:36:10 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 28 20:36:10 2011] Updating source flux to 4.4e-14 [Wed Sep 28 20:36:29 2011] Reading fit data from acisf05913/analysis//spectral/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_pl.csv [Wed Sep 28 20:36:29 2011] Spectral fit parameter nH value = 9.72374e+21 [Wed Sep 28 20:36:29 2011] Spectral fit parameter PhoIndex value = 1.6765 [Wed Sep 28 20:36:29 2011] Failed to get F(0.3-8.0) from acisf05913/analysis//spectral/fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Sep 28 20:36:29 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 28 20:36:29 2011] Using Nh = 9.7e+21, photon index=1.68, rate=0.00351, arf fullrun_ccd3_acisf05913_pi14-548_pass1_cl_src1.arf [Wed Sep 28 20:36:29 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 28 20:36:29 2011] Updating source flux to 5.9e-14