[Wed Sep 28 20:31:15 2011] Detection parameters:
  Position = (195.8, 792.4) = 12 25 4.51 13 16 33.7
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 24.9 +/- 5.1
  Background counts = 1.1
  Rate = 0.0007 +/- 0.0001

[Wed Sep 28 20:31:16 2011] Off-axis axis estimate = 1.63'
[Wed Sep 28 20:32:09 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:09 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 20:32:09 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.306
[Wed Sep 28 20:32:09 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.40"
[Wed Sep 28 20:32:10 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11.ximg exists
[Wed Sep 28 20:32:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11.csv
[Wed Sep 28 20:32:10 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Sep 28 20:32:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11.csv
[Wed Sep 28 20:32:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05913_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:10 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Sep 28 20:32:10 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Sep 28 20:32:10 2011] Fit fullrun_ccd2_acisf05913_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Sep 28 20:32:19 2011] Spatial fit model total counts = 31.597200, observed total counts = 31.000000
[Wed Sep 28 20:32:19 2011] Offset between fit and detection position for source 8 = 0.506149 pixels
[Wed Sep 28 20:32:19 2011] 32.520770 total counts/ 9.267970 bgd. counts: snr = 7.638058
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.506149 pixels
  Position = (196.0, 792.8) = 12 25 4.52 13 16 33.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.3 +/- 5.7
  Background counts = 9.3
  Rate = 0.0007 +/- 0.0002
[Wed Sep 28 20:32:19 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:19 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:19 2011] Source does appear to be extended
[Wed Sep 28 20:32:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:32:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 20:32:38 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 20:32:38 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.574
[Wed Sep 28 20:32:38 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.40"
[Wed Sep 28 20:32:39 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11.ximg exists
[Wed Sep 28 20:32:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 20:32:39 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Sep 28 20:32:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 20:32:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05913_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 20:32:39 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Sep 28 20:32:39 2011] fullrun_ccd2_acisf05913_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Sep 28 20:32:39 2011] Fit fullrun_ccd2_acisf05913_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Sep 28 20:32:48 2011] Spatial fit model total counts = 29.302700, observed total counts = 30.000000
[Wed Sep 28 20:32:48 2011] Offset between fit and detection position for source 8 = 0.021485 pixels
[Wed Sep 28 20:32:48 2011] 30.542220 total counts/ 6.883420 bgd. counts: snr = 9.017592
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.021485 pixels
  Position = (196.0, 792.8) = 12 25 4.52 13 16 33.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.7 +/- 5.5
  Background counts = 6.9
  Rate = 0.0007 +/- 0.0002
[Wed Sep 28 20:32:48 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 20:32:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 20:32:48 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 20:32:48 2011] Source does appear to be extended
[Wed Sep 28 20:32:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 20:34:09 2011] Not overwriting source region fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.reg
[Wed Sep 28 20:34:09 2011] Extracting stamp from image fullrun_ccd2_acisf05913_pi14-548_cl_sm2.00.img.gz, (177, 774) - (215, 812)
[Wed Sep 28 20:34:09 2011] Writing fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8.gif
[Wed Sep 28 20:34:39 2011] ../../acisf05913/products/events/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.evt and ../../acisf05913/products/events/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Wed Sep 28 20:34:39 2011] Size of ../../acisf05913/products/events/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.evt.gz[events] = 24 counts
[Wed Sep 28 20:34:39 2011] Mean chipx,y = (163.88, 895.00)
[Wed Sep 28 20:34:39 2011] Mean tdetx,y = (3956.00, 3922.12)
[Wed Sep 28 20:34:39 2011] chipx,y range = (149.00-181.00, 877.00-910.00)
[Wed Sep 28 20:34:39 2011] Size of ../../acisf05913/products/events/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 8 counts
[Wed Sep 28 20:34:39 2011] ../../acisf05913/products/images/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.img and ../../acisf05913/products/images/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Wed Sep 28 20:34:39 2011] ../../acisf05913/products/spectra/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.pi and ../../acisf05913/products/spectra/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Wed Sep 28 20:34:39 2011] Not generating rmf since there are only 23 counts
[Wed Sep 28 20:34:42 2011] ../../acisf05913/products/lightcurves/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.lc and ../../acisf05913/products/lightcurves/fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Wed Sep 28 20:35:15 2011] 202.996
[Wed Sep 28 20:36:09 2011] Updating aperture counts using extracted products
[Wed Sep 28 20:36:09 2011] Error reading totcts from fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8_src.pi.gz
[Wed Sep 28 20:36:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 20:36:10 2011] Using photon index=1.80, rate=0.000663, arf fullrun_ccd2_acisf05913_pi14-548_pass1_cl_src8.arf
[Wed Sep 28 20:36:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 20:36:10 2011] Updating source flux to 7.3e-15
[Wed Sep 28 20:36:19 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting