[Mon Oct 24 21:39:58 2011] Detection parameters:
  Position = (823.4, 549.8) = 17 43 47.56 -29 23 10.0
  Extent = 1.6" x 1.3", rotation angle = 162 degrees
  Source counts = 186.5 +/- 15.0
  Background counts = 37.5
  Rate = 0.002 +/- 0.0002

[Mon Oct 24 21:40:02 2011] Off-axis axis estimate = 7.92'
[Mon Oct 24 21:42:24 2011] Using EEF radius (= 2.77 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:42:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 21:42:24 2011] Initial guess for spatial extent in simple fitting = 2.77"
[Mon Oct 24 21:42:24 2011] source mask rpix=5.6, npix_max = 150, mask sum = 156, frac = 1.036
[Mon Oct 24 21:42:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.77"
[Mon Oct 24 21:42:25 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 21:42:26 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 21:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05892_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:42:27 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 21:42:27 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 21:42:27 2011] Fit fullrun_ccd1_acisf05892_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 21:43:01 2011] Spatial fit model total counts = 263.338000, observed total counts = 261.000000
[Mon Oct 24 21:43:01 2011] Offset between fit and detection position for source 2 = 2.261036 pixels
[Mon Oct 24 21:43:01 2011] 263.781300 total counts/ 73.484300 bgd. counts: snr = 22.199064
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.261036 pixels
  Position = (825.5, 550.5) = 17 43 47.49 -29 23 9.9
  Extent = 2.6 (2.2-2.9)", rotation angle = 0
  Source counts = 190.3 +/- 16.2
  Background counts = 73.5
  Rate = 0.002 +/- 0.0002
[Mon Oct 24 21:43:01 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:43:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:43:01 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:43:01 2011] Source does appear to be extended
[Mon Oct 24 21:43:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:43:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:43:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 21:43:51 2011] Initial guess for spatial extent in simple fitting = 2.58"
[Mon Oct 24 21:43:51 2011] source mask rpix=5.2, npix_max = 132, mask sum = 121, frac = 0.916
[Mon Oct 24 21:43:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.58"
[Mon Oct 24 21:43:52 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 21:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 21:43:52 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 21:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 21:43:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05892_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:43:53 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 21:43:53 2011] fullrun_ccd1_acisf05892_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 21:43:53 2011] Fit fullrun_ccd1_acisf05892_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 21:44:19 2011] Spatial fit model total counts = 253.517000, observed total counts = 251.000000
[Mon Oct 24 21:44:19 2011] Offset between fit and detection position for source 2 = 0.103563 pixels
[Mon Oct 24 21:44:19 2011] 254.211100 total counts/ 61.975100 bgd. counts: snr = 24.418900
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.103563 pixels
  Position = (825.6, 550.4) = 17 43 47.49 -29 23 9.9
  Extent = 2.6 (2.2-3.0)", rotation angle = 0
  Source counts = 192.2 +/- 15.9
  Background counts = 62.0
  Rate = 0.002 +/- 0.0002
[Mon Oct 24 21:44:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:44:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:44:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:44:19 2011] Source does appear to be extended
[Mon Oct 24 21:44:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:46:37 2011] Not overwriting source region fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 21:46:37 2011] Extracting stamp from image fullrun_ccd1_acisf05892_pi14-548_cl_sm2.00.img.gz, (707, 432) - (944, 669)
[Mon Oct 24 21:46:37 2011] Writing fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 21:46:40 2011] ../../acisf05892/products/events/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.evt and ../../acisf05892/products/events/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 21:46:40 2011] Size of ../../acisf05892/products/events/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.evt.gz[events] = 241 counts
[Mon Oct 24 21:46:40 2011] Mean chipx,y = (751.68, 516.46)
[Mon Oct 24 21:46:40 2011] Mean tdetx,y = (4615.54, 4858.68)
[Mon Oct 24 21:46:40 2011] chipx,y range = (726.00-788.00, 485.00-549.00)
[Mon Oct 24 21:46:40 2011] Size of ../../acisf05892/products/events/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 642 counts
[Mon Oct 24 21:46:40 2011] ../../acisf05892/products/images/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.img and ../../acisf05892/products/images/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 21:46:40 2011] ../../acisf05892/products/spectra/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.pi and ../../acisf05892/products/spectra/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 21:46:43 2011] ../../acisf05892/products/lightcurves/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.lc and ../../acisf05892/products/lightcurves/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 21:49:26 2011] Keeping rmf generated by specextract
[Mon Oct 24 21:49:26 2011] 177.461
[Mon Oct 24 21:53:28 2011] Updating aperture counts using extracted products
[Mon Oct 24 21:53:28 2011] Error reading totcts from fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 21:53:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 21:53:29 2011] Using photon index=1.80, rate=0.00196, arf fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 21:53:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 21:53:29 2011] Updating source flux to 3.3e-14
[Mon Oct 24 21:54:21 2011] Reading fit data from acisf05892/analysis//spectral/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 24 21:54:21 2011] Spectral fit parameter nH value = 1.54376e+23
[Mon Oct 24 21:54:21 2011] Spectral fit parameter PhoIndex value = 2.98084
[Mon Oct 24 21:54:21 2011] Failed to get F(0.3-8.0) from acisf05892/analysis//spectral/fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 21:54:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 21:54:21 2011] Using Nh = 1.5e+23, photon index=2.98, rate=0.00196, arf fullrun_ccd1_acisf05892_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 21:54:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 21:54:21 2011] Updating source flux to 5.8e-14