[Mon Oct 24 21:39:56 2011] Detection parameters:
  Position = (1019.5, 763.6) = 17 43 45.48 -29 29 49.1
  Extent = 1.8" x 1.6", rotation angle = 21 degrees
  Source counts = 71.5 +/- 11.4
  Background counts = 59.5
  Rate = 0.0007 +/- 0.0001

[Mon Oct 24 21:39:57 2011] Off-axis axis estimate = 8.57'
[Mon Oct 24 21:42:22 2011] Using EEF radius (= 3.24 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:42:22 2011] Initial guess for spatial extent in simple fitting = 3.24"
[Mon Oct 24 21:42:22 2011] source mask rpix=6.6, npix_max = 201, mask sum = 225, frac = 1.118
[Mon Oct 24 21:42:22 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 3.24"
[Mon Oct 24 21:42:23 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37.ximg exists
[Mon Oct 24 21:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37.csv
[Mon Oct 24 21:42:23 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Oct 24 21:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37.csv
[Mon Oct 24 21:42:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:42:24 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Oct 24 21:42:24 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Oct 24 21:42:24 2011] Fit fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Oct 24 21:42:54 2011] Spatial fit model total counts = 174.706000, observed total counts = 179.000000
[Mon Oct 24 21:42:54 2011] Offset between fit and detection position for source 37 = 1.801632 pixels
[Mon Oct 24 21:42:54 2011] 173.389100 total counts/ 83.057900 bgd. counts: snr = 9.911681
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.801632 pixels
  Position = (1021.1, 762.8) = 17 43 45.44 -29 29 49.7
  Extent = 4.1 (2.7-5.8)", rotation angle = 0
  Source counts = 90.3 +/- 13.2
  Background counts = 83.1
  Rate = 0.0009 +/- 0.0001
[Mon Oct 24 21:42:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:42:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:42:54 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:42:54 2011] Source does appear to be extended
[Mon Oct 24 21:42:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:43:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:43:48 2011] Initial guess for spatial extent in simple fitting = 4.06"
[Mon Oct 24 21:43:48 2011] source mask rpix=8.3, npix_max = 306, mask sum = 324, frac = 1.058
[Mon Oct 24 21:43:48 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 4.06"
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36.ximg exists
[Mon Oct 24 21:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36.csv
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36_1.ximg exists
[Mon Oct 24 21:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36.csv
[Mon Oct 24 21:43:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:43:51 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Mon Oct 24 21:43:51 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Oct 24 21:43:51 2011] Fit fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Oct 24 21:44:12 2011] Spatial fit model total counts = 235.976000, observed total counts = 241.000000
[Mon Oct 24 21:44:12 2011] Offset between fit and detection position for source 37 = 0.508376 pixels
[Mon Oct 24 21:44:12 2011] 234.817900 total counts/ 154.942000 bgd. counts: snr = 6.416987
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.508376 pixels
  Position = (1020.6, 762.7) = 17 43 45.46 -29 29 49.7
  Extent = 3.7 (2.7-4.8)", rotation angle = 0
  Source counts = 79.9 +/- 15.3
  Background counts = 154.9
  Rate = 0.0008 +/- 0.0002
[Mon Oct 24 21:44:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:44:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:44:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:44:12 2011] Source does appear to be extended
[Mon Oct 24 21:44:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:44:56 2011] Not overwriting source region fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.reg
[Mon Oct 24 21:44:56 2011] Extracting stamp from image fullrun_ccd0_acisf05892_pi14-548_cl_sm2.00.img.gz, (851, 593) - (1167, 933)
[Mon Oct 24 21:44:56 2011] Writing fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37.gif
[Mon Oct 24 21:46:13 2011] ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.evt and ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_bgd.evt exist, delete to re-create
[Mon Oct 24 21:46:13 2011] Size of ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.evt.gz[events] = 180 counts
[Mon Oct 24 21:46:13 2011] Mean chipx,y = (109.49, 750.27)
[Mon Oct 24 21:46:13 2011] Mean tdetx,y = (3811.27, 5022.51)
[Mon Oct 24 21:46:13 2011] chipx,y range = (68.00-152.00, 718.00-790.00)
[Mon Oct 24 21:46:13 2011] Size of ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 1322 counts
[Mon Oct 24 21:46:13 2011] ../../acisf05892/products/images/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.img and ../../acisf05892/products/images/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_bgd.img exist, delete to re-create
[Mon Oct 24 21:46:13 2011] ../../acisf05892/products/spectra/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.pi and ../../acisf05892/products/spectra/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_bgd.pi exist, delete to re-create
[Mon Oct 24 21:46:13 2011] Not generating rmf since there are only 79 counts
[Mon Oct 24 21:46:16 2011] ../../acisf05892/products/lightcurves/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.lc and ../../acisf05892/products/lightcurves/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_bgd.lc exist, delete to re-create
[Mon Oct 24 21:46:36 2011] 165.877
[Mon Oct 24 21:53:28 2011] Updating aperture counts using extracted products
[Mon Oct 24 21:53:28 2011] Error reading totcts from fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37_src.pi.gz
[Mon Oct 24 21:53:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 21:53:28 2011] Using photon index=1.80, rate=0.000816, arf fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src37.arf
[Mon Oct 24 21:53:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 21:53:28 2011] Updating source flux to 1.5e-14
[Mon Oct 24 21:53:38 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting