[Mon Oct 24 21:39:56 2011] Detection parameters:
  Position = (302.9, 737.0) = 17 44 12.48 -29 30 2.4
  Extent = 0.7" x 0.5", rotation angle = 51 degrees
  Source counts = 12.3 +/- 3.9
  Background counts = 2.7
  Rate = 0.0001 +/- 4e-05

[Mon Oct 24 21:39:57 2011] Off-axis axis estimate = 4.28'
[Mon Oct 24 21:42:22 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:42:22 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Mon Oct 24 21:42:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.713
[Mon Oct 24 21:42:22 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.92"
[Mon Oct 24 21:42:23 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29.ximg exists
[Mon Oct 24 21:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29.csv
[Mon Oct 24 21:42:23 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Oct 24 21:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29.csv
[Mon Oct 24 21:42:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05892_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:42:24 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Oct 24 21:42:24 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Oct 24 21:42:24 2011] Fit fullrun_ccd0_acisf05892_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Oct 24 21:42:54 2011] Spatial fit model total counts = 31.488800, observed total counts = 32.000000
[Mon Oct 24 21:42:54 2011] Offset between fit and detection position for source 29 = 1.779304 pixels
[Mon Oct 24 21:42:54 2011] 31.508900 total counts/ 15.161700 bgd. counts: snr = 4.198261
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.779304 pixels
  Position = (302.6, 738.7) = 17 44 12.51 -29 30 1.8
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 16.3 +/- 5.6
  Background counts = 15.2
  Rate = 0.0002 +/- 6e-05
[Mon Oct 24 21:42:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:42:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:42:54 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:42:54 2011] Source does appear to be extended
[Mon Oct 24 21:42:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:43:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:43:48 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Mon Oct 24 21:43:48 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.166
[Mon Oct 24 21:43:48 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.89"
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28.ximg exists
[Mon Oct 24 21:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28.csv
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Oct 24 21:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28.csv
[Mon Oct 24 21:43:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05892_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Oct 24 21:43:50 2011] fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Oct 24 21:43:50 2011] Fit fullrun_ccd0_acisf05892_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Oct 24 21:44:12 2011] Spatial fit model total counts = 30.935900, observed total counts = 31.000000
[Mon Oct 24 21:44:12 2011] Offset between fit and detection position for source 29 = 0.078530 pixels
[Mon Oct 24 21:44:12 2011] 31.062900 total counts/ 15.085200 bgd. counts: snr = 4.113758
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.078530 pixels
  Position = (302.5, 738.7) = 17 44 12.52 -29 30 1.8
  Extent = 0.9 (0.6-1.5)", rotation angle = 0
  Source counts = 16.0 +/- 5.6
  Background counts = 15.1
  Rate = 0.0002 +/- 6e-05
[Mon Oct 24 21:44:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:44:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:44:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:44:12 2011] Source does appear to be extended
[Mon Oct 24 21:44:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:44:56 2011] Not overwriting source region fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.reg
[Mon Oct 24 21:44:56 2011] Extracting stamp from image fullrun_ccd0_acisf05892_pi14-548_cl_sm2.00.img.gz, (263, 699) - (342, 778)
[Mon Oct 24 21:44:56 2011] Writing fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29.gif
[Mon Oct 24 21:45:54 2011] ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.evt and ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Oct 24 21:45:54 2011] Size of ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.evt.gz[events] = 26 counts
[Mon Oct 24 21:45:54 2011] Mean chipx,y = (816.38, 630.38)
[Mon Oct 24 21:45:54 2011] Mean tdetx,y = (3691.38, 4315.62)
[Mon Oct 24 21:45:54 2011] chipx,y range = (798.00-834.00, 612.00-653.00)
[Mon Oct 24 21:45:54 2011] Size of ../../acisf05892/products/events/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 81 counts
[Mon Oct 24 21:45:54 2011] ../../acisf05892/products/images/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.img and ../../acisf05892/products/images/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Oct 24 21:45:54 2011] ../../acisf05892/products/spectra/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.pi and ../../acisf05892/products/spectra/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Oct 24 21:45:54 2011] Not generating rmf since there are only 15 counts
[Mon Oct 24 21:45:57 2011] ../../acisf05892/products/lightcurves/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.lc and ../../acisf05892/products/lightcurves/fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Oct 24 21:46:36 2011] 191.947
[Mon Oct 24 21:53:28 2011] Updating aperture counts using extracted products
[Mon Oct 24 21:53:28 2011] Error reading totcts from fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29_src.pi.gz
[Mon Oct 24 21:53:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 21:53:28 2011] Using photon index=1.80, rate=0.000163, arf fullrun_ccd0_acisf05892_pi14-548_pass1_cl_src29.arf
[Mon Oct 24 21:53:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 21:53:28 2011] Updating source flux to 2.6e-15
[Mon Oct 24 21:53:38 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting