[Sun Sep 25 19:06:16 2011] Detection parameters:
  Position = (1093.1, 160.3) = 2 25 39.01 62 5 44.8
  Extent = 0.6" x 0.5", rotation angle = 85 degrees
  Source counts = 17.4 +/- 4.7
  Background counts = 4.6
  Rate = 0.0004 +/- 0.0001

[Sun Sep 25 19:06:29 2011] Off-axis axis estimate = 0.12'
[Sun Sep 25 19:09:00 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:09:00 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Sep 25 19:09:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.821
[Sun Sep 25 19:09:00 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 0.42"
[Sun Sep 25 19:09:02 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32.ximg exists
[Sun Sep 25 19:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32.csv
[Sun Sep 25 19:09:02 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32_1.ximg exists
[Sun Sep 25 19:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32.csv
[Sun Sep 25 19:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05890_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:09:04 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Sun Sep 25 19:09:04 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Sep 25 19:09:04 2011] Fit fullrun_ccd3_acisf05890_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Sun Sep 25 19:09:50 2011] Spatial fit model total counts = 59.506200, observed total counts = 58.000000
[Sun Sep 25 19:09:50 2011] Offset between fit and detection position for source 5 = 0.276283 pixels
[Sun Sep 25 19:09:50 2011] 59.753200 total counts/ 45.404000 bgd. counts: snr = 2.129515
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.276283 pixels
  Position = (1093.1, 160.6) = 2 25 39.05 62 5 44.7
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 14.3 +/- 7.7
  Background counts = 45.4
  Rate = 0.0004 +/- 0.0002
[Sun Sep 25 19:09:50 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:09:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:09:50 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:09:50 2011] Source does appear to be extended
[Sun Sep 25 19:09:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:10:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:10:34 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Sun Sep 25 19:10:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.956
[Sun Sep 25 19:10:34 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.37"
[Sun Sep 25 19:10:41 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32.ximg exists
[Sun Sep 25 19:10:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 19:10:41 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32_1.ximg exists
[Sun Sep 25 19:10:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 19:10:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05890_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:10:48 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Sun Sep 25 19:10:48 2011] fullrun_ccd3_acisf05890_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Sep 25 19:10:48 2011] Fit fullrun_ccd3_acisf05890_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Sun Sep 25 19:11:25 2011] Spatial fit model total counts = 57.723400, observed total counts = 58.000000
[Sun Sep 25 19:11:25 2011] Offset between fit and detection position for source 5 = 0.026437 pixels
[Sun Sep 25 19:11:25 2011] 57.930300 total counts/ 43.380200 bgd. counts: snr = 2.209125
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.026437 pixels
  Position = (1093.1, 160.6) = 2 25 39.05 62 5 44.7
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 14.6 +/- 7.6
  Background counts = 43.4
  Rate = 0.0004 +/- 0.0002
[Sun Sep 25 19:11:25 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:11:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:11:25 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:11:25 2011] Source does appear to be extended
[Sun Sep 25 19:11:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:21:10 2011] Not overwriting source region fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.reg
[Sun Sep 25 19:21:10 2011] Extracting stamp from image fullrun_ccd3_acisf05890_pi14-548_cl_sm2.00.img.gz, (1076, 144) - (1110, 177)
[Sun Sep 25 19:21:10 2011] Writing fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5.gif
[Sun Sep 25 19:22:59 2011] ../../acisf05890/products/events/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.evt and ../../acisf05890/products/events/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Sep 25 19:22:59 2011] Size of ../../acisf05890/products/events/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.evt.gz[events] = 19 counts
[Sun Sep 25 19:22:59 2011] Mean chipx,y = (970.42, 994.05)
[Sun Sep 25 19:22:59 2011] Mean tdetx,y = (4137.95, 4031.42)
[Sun Sep 25 19:22:59 2011] chipx,y range = (955.00-988.00, 977.00-1011.00)
[Sun Sep 25 19:22:59 2011] Size of ../../acisf05890/products/events/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 42 counts
[Sun Sep 25 19:22:59 2011] ../../acisf05890/products/images/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.img and ../../acisf05890/products/images/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Sep 25 19:22:59 2011] ../../acisf05890/products/spectra/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.pi and ../../acisf05890/products/spectra/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Sep 25 19:22:59 2011] Not generating rmf since there are only 14 counts
[Sun Sep 25 19:23:02 2011] ../../acisf05890/products/lightcurves/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.lc and ../../acisf05890/products/lightcurves/fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Sep 25 19:27:29 2011] 204.394
[Sun Sep 25 19:28:00 2011] Updating aperture counts using extracted products
[Sun Sep 25 19:28:00 2011] Error reading totcts from fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Sep 25 19:28:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:28:02 2011] Using photon index=1.80, rate=0.000367, arf fullrun_ccd3_acisf05890_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 19:28:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:28:02 2011] Updating source flux to 5e-15
[Sun Sep 25 19:28:48 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting