[Sun Sep 25 19:06:11 2011] Detection parameters:
  Position = (888.7, 955.9) = 2 25 43.66 62 3 45.0
  Extent = 0.6" x 0.5", rotation angle = 106 degrees
  Source counts = 18.2 +/- 4.4
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Sun Sep 25 19:06:15 2011] Off-axis axis estimate = 1.95'
[Sun Sep 25 19:08:58 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:08:58 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Sep 25 19:08:58 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.805
[Sun Sep 25 19:08:58 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 0.43"
[Sun Sep 25 19:08:59 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32.ximg exists
[Sun Sep 25 19:08:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32.csv
[Sun Sep 25 19:08:59 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32_1.ximg exists
[Sun Sep 25 19:08:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32.csv
[Sun Sep 25 19:08:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05890_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:09:00 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Sun Sep 25 19:09:00 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Sep 25 19:09:00 2011] Fit fullrun_ccd2_acisf05890_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Sun Sep 25 19:09:40 2011] Spatial fit model total counts = 21.659900, observed total counts = 22.000000
[Sun Sep 25 19:09:40 2011] Offset between fit and detection position for source 15 = 0.765345 pixels
[Sun Sep 25 19:09:40 2011] 21.969560 total counts/ 4.469660 bgd. counts: snr = 8.277483
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.765345 pixels
  Position = (889.3, 956.4) = 2 25 43.66 62 3 45.0
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 17.5 +/- 4.7
  Background counts = 4.5
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 19:09:40 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:09:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:09:40 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:09:40 2011] Source does appear to be extended
[Sun Sep 25 19:09:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:10:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:10:32 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Sep 25 19:10:32 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.883
[Sun Sep 25 19:10:32 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.66"
[Sun Sep 25 19:10:33 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32.ximg exists
[Sun Sep 25 19:10:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 19:10:33 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32_1.ximg exists
[Sun Sep 25 19:10:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 19:10:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05890_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:10:34 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Sun Sep 25 19:10:34 2011] fullrun_ccd2_acisf05890_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Sep 25 19:10:34 2011] Fit fullrun_ccd2_acisf05890_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Sun Sep 25 19:11:14 2011] Spatial fit model total counts = 21.071200, observed total counts = 22.000000
[Sun Sep 25 19:11:14 2011] Offset between fit and detection position for source 15 = 0.036915 pixels
[Sun Sep 25 19:11:14 2011] 21.380980 total counts/ 3.943980 bgd. counts: snr = 8.780200
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.036915 pixels
  Position = (889.2, 956.4) = 2 25 43.66 62 3 45.0
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 17.4 +/- 4.6
  Background counts = 3.9
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 19:11:14 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:11:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:11:14 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:11:14 2011] Source does appear to be extended
[Sun Sep 25 19:11:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:18:01 2011] Not overwriting source region fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.reg
[Sun Sep 25 19:18:01 2011] Extracting stamp from image fullrun_ccd2_acisf05890_pi14-548_cl_sm2.00.img.gz, (858, 925) - (920, 987)
[Sun Sep 25 19:18:01 2011] Writing fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15.gif
[Sun Sep 25 19:19:49 2011] ../../acisf05890/products/events/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.evt and ../../acisf05890/products/events/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Sep 25 19:19:49 2011] Size of ../../acisf05890/products/events/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.evt.gz[events] = 19 counts
[Sun Sep 25 19:19:49 2011] Mean chipx,y = (151.53, 843.53)
[Sun Sep 25 19:19:49 2011] Mean tdetx,y = (3904.53, 3934.47)
[Sun Sep 25 19:19:49 2011] chipx,y range = (137.00-166.00, 827.00-863.00)
[Sun Sep 25 19:19:49 2011] Size of ../../acisf05890/products/events/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 14 counts
[Sun Sep 25 19:19:49 2011] ../../acisf05890/products/images/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.img and ../../acisf05890/products/images/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Sep 25 19:19:49 2011] ../../acisf05890/products/spectra/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.pi and ../../acisf05890/products/spectra/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Sep 25 19:19:49 2011] Not generating rmf since there are only 17 counts
[Sun Sep 25 19:19:52 2011] ../../acisf05890/products/lightcurves/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.lc and ../../acisf05890/products/lightcurves/fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Sep 25 19:21:08 2011] 158.981
[Sun Sep 25 19:27:59 2011] Updating aperture counts using extracted products
[Sun Sep 25 19:27:59 2011] Error reading totcts from fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Sep 25 19:28:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:28:00 2011] Using photon index=1.80, rate=0.00044, arf fullrun_ccd2_acisf05890_pi14-548_pass1_cl_src15.arf
[Sun Sep 25 19:28:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:28:00 2011] Updating source flux to 7.6e-15
[Sun Sep 25 19:28:32 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting