[Tue Oct 18 05:36:53 2011] Detection parameters:
  Position = (905.0, 1009.2) = 14 17 32.62 52 38 18.4
  Extent = 2.1" x 1.2", rotation angle = 131 degrees
  Source counts = 67.8 +/- 8.7
  Background counts = 8.2
  Rate = 0.001 +/- 0.0002

[Tue Oct 18 05:36:55 2011] Off-axis axis estimate = 7.47'
[Tue Oct 18 05:37:57 2011] Using EEF radius (= 2.48 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 05:37:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 05:37:57 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Tue Oct 18 05:37:57 2011] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.989
[Tue Oct 18 05:37:57 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.48"
[Tue Oct 18 05:37:58 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 05:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 05:37:58 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 05:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 05:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05850_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 05:37:58 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 05:37:58 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 05:37:58 2011] Fit fullrun_ccd1_acisf05850_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct 18 05:38:09 2011] Spatial fit model total counts = 84.299100, observed total counts = 84.000000
[Tue Oct 18 05:38:09 2011] Offset between fit and detection position for source 2 = 0.735190 pixels
[Tue Oct 18 05:38:09 2011] 83.927000 total counts/ 26.209600 bgd. counts: snr = 11.273962
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.735190 pixels
  Position = (905.2, 1009.9) = 14 17 32.63 52 38 18.5
  Extent = 1.7 (1.3-2.1)", rotation angle = 0
  Source counts = 57.7 +/- 9.2
  Background counts = 26.2
  Rate = 0.001 +/- 0.0002
[Tue Oct 18 05:38:09 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 05:38:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 05:38:09 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 05:38:09 2011] Source does appear to be extended
[Tue Oct 18 05:38:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 05:38:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 05:38:34 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Tue Oct 18 05:38:34 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.047
[Tue Oct 18 05:38:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.68"
[Tue Oct 18 05:38:36 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 05:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 05:38:36 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 05:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 05:38:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05850_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 05:38:36 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 05:38:36 2011] fullrun_ccd1_acisf05850_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 05:38:36 2011] Fit fullrun_ccd1_acisf05850_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct 18 05:38:47 2011] Spatial fit model total counts = 68.815400, observed total counts = 69.000000
[Tue Oct 18 05:38:47 2011] Offset between fit and detection position for source 2 = 0.872614 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.872614 pixels
  Position = (904.6, 1010.5) = 14 17 32.67 52 38 18.8
  Extent = 1.9 (1.4-2.1)", rotation angle = 0
  Source counts = 68.2 +/- 8.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Oct 18 05:38:47 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 05:38:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 05:38:47 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 05:38:47 2011] Source does appear to be extended
[Tue Oct 18 05:38:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 05:40:01 2011] Not overwriting source region fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.reg
[Tue Oct 18 05:40:01 2011] Extracting stamp from image fullrun_ccd1_acisf05850_pi14-548_cl_sm2.00.img.gz, (819, 925) - (990, 1096)
[Tue Oct 18 05:40:01 2011] Writing fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2.gif
[Tue Oct 18 05:40:09 2011] ../../acisf05850/products/events/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.evt and ../../acisf05850/products/events/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Oct 18 05:40:09 2011] Size of ../../acisf05850/products/events/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.evt.gz[events] = 77 counts
[Tue Oct 18 05:40:09 2011] Mean chipx,y = (239.30, 156.27)
[Tue Oct 18 05:40:09 2011] Mean tdetx,y = (4975.73, 4346.30)
[Tue Oct 18 05:40:09 2011] chipx,y range = (210.00-263.00, 133.00-184.00)
[Tue Oct 18 05:40:09 2011] Size of ../../acisf05850/products/events/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 95 counts
[Tue Oct 18 05:40:09 2011] ../../acisf05850/products/images/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.img and ../../acisf05850/products/images/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Oct 18 05:40:09 2011] ../../acisf05850/products/spectra/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.pi and ../../acisf05850/products/spectra/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Oct 18 05:40:09 2011] Not generating rmf since there are only 68 counts
[Tue Oct 18 05:40:12 2011] ../../acisf05850/products/lightcurves/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.lc and ../../acisf05850/products/lightcurves/fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Oct 18 05:41:32 2011] 174.181
[Tue Oct 18 05:44:25 2011] Updating aperture counts using extracted products
[Tue Oct 18 05:44:25 2011] Error reading totcts from fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Oct 18 05:44:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 05:44:25 2011] Using photon index=1.80, rate=0.0015, arf fullrun_ccd1_acisf05850_pi14-548_pass1_cl_src2.arf
[Tue Oct 18 05:44:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 05:44:25 2011] Updating source flux to 2e-14
[Tue Oct 18 05:44:32 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting