[Fri Oct  7 22:37:20 2011] Detection parameters:
  Position = (849.9, 1170.8) = 14 19 29.02 52 49 59.1
  Extent = 0.5" x 0.5", rotation angle = 23 degrees
  Source counts = 58.5 +/- 7.7
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 22:37:21 2011] Off-axis axis estimate = 1.24'
[Fri Oct  7 22:38:13 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 22:38:13 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 22:38:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.612
[Fri Oct  7 22:38:13 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Fri Oct  7 22:38:14 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 22:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 22:38:14 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 22:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 22:38:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05847_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 22:38:15 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 22:38:15 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 22:38:15 2011] Fit fullrun_ccd3_acisf05847_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 22:38:28 2011] Spatial fit model total counts = 62.881300, observed total counts = 63.000000
[Fri Oct  7 22:38:28 2011] Offset between fit and detection position for source 13 = 0.624557 pixels
[Fri Oct  7 22:38:28 2011] 63.506430 total counts/ 8.175630 bgd. counts: snr = 19.351130
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.624557 pixels
  Position = (850.3, 1171.3) = 14 19 29.03 52 49 59.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 55.3 +/- 8.0
  Background counts = 8.2
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 22:38:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 22:38:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 22:38:28 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 22:38:28 2011] Source does appear to be extended
[Fri Oct  7 22:38:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 22:38:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 22:38:50 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 22:38:50 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.383
[Fri Oct  7 22:38:50 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.38"
[Fri Oct  7 22:38:52 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 22:38:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 22:38:52 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 22:38:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 22:38:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05847_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 22:38:53 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 22:38:53 2011] fullrun_ccd3_acisf05847_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 22:38:53 2011] Fit fullrun_ccd3_acisf05847_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 22:39:03 2011] Spatial fit model total counts = 62.884300, observed total counts = 63.000000
[Fri Oct  7 22:39:03 2011] Offset between fit and detection position for source 13 = 0.000020 pixels
[Fri Oct  7 22:39:03 2011] 63.509450 total counts/ 8.176250 bgd. counts: snr = 19.351236
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.000020 pixels
  Position = (850.3, 1171.3) = 14 19 29.03 52 49 59.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 55.3 +/- 8.0
  Background counts = 8.2
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 22:39:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 22:39:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 22:39:03 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 22:39:03 2011] Source does appear to be extended
[Fri Oct  7 22:39:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 22:43:10 2011] Not overwriting source region fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.reg
[Fri Oct  7 22:43:10 2011] Extracting stamp from image fullrun_ccd3_acisf05847_pi14-548_cl_sm2.00.img.gz, (833, 1154) - (868, 1189)
[Fri Oct  7 22:43:10 2011] Writing fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13.gif
[Fri Oct  7 22:43:36 2011] ../../acisf05847/products/events/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.evt and ../../acisf05847/products/events/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Oct  7 22:43:36 2011] Size of ../../acisf05847/products/events/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.evt.gz[events] = 56 counts
[Fri Oct  7 22:43:36 2011] Mean chipx,y = (925.62, 867.89)
[Fri Oct  7 22:43:36 2011] Mean tdetx,y = (4264.11, 3986.62)
[Fri Oct  7 22:43:36 2011] chipx,y range = (904.00-938.00, 849.00-886.00)
[Fri Oct  7 22:43:36 2011] Size of ../../acisf05847/products/events/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 8 counts
[Fri Oct  7 22:43:36 2011] ../../acisf05847/products/images/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.img and ../../acisf05847/products/images/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Oct  7 22:43:36 2011] ../../acisf05847/products/spectra/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.pi and ../../acisf05847/products/spectra/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Oct  7 22:43:36 2011] Not generating rmf since there are only 55 counts
[Fri Oct  7 22:43:40 2011] ../../acisf05847/products/lightcurves/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.lc and ../../acisf05847/products/lightcurves/fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Oct  7 22:44:55 2011] 202.496
[Fri Oct  7 22:45:04 2011] Updating aperture counts using extracted products
[Fri Oct  7 22:45:04 2011] Error reading totcts from fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Oct  7 22:45:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 22:45:04 2011] Using photon index=1.80, rate=0.00124, arf fullrun_ccd3_acisf05847_pi14-548_pass1_cl_src13.arf
[Fri Oct  7 22:45:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 22:45:04 2011] Updating source flux to 1.4e-14
[Fri Oct  7 22:45:11 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting