[Wed Sep 28 04:37:06 2011] Detection parameters:
  Position = (596.0, 788.8) = 14 21 43.04 53 8 51.9
  Extent = 0.9" x 0.5", rotation angle = 9 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0003 +/- 8e-05

[Wed Sep 28 04:37:06 2011] Off-axis axis estimate = 5.13'
[Wed Sep 28 04:37:51 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:37:51 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Wed Sep 28 04:37:51 2011] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.885
[Wed Sep 28 04:37:51 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.23"
[Wed Sep 28 04:37:52 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12.ximg exists
[Wed Sep 28 04:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12.csv
[Wed Sep 28 04:37:52 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Sep 28 04:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12.csv
[Wed Sep 28 04:37:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05844_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:37:52 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep 28 04:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12.csv
[Wed Sep 28 04:37:52 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep 28 04:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12.csv
[Wed Sep 28 04:37:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05844_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:38:04 2011] Spatial fit model total counts = 26.142300, observed total counts = 29.000000
[Wed Sep 28 04:38:04 2011] Offset between fit and detection position for source 20 = 1.825020 pixels
[Wed Sep 28 04:38:04 2011] 26.795300 total counts/ 3.963000 bgd. counts: snr = 11.469319
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.825020 pixels
  Position = (595.0, 790.4) = 14 21 43.12 53 8 52.4
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 22.8 +/- 5.2
  Background counts = 4.0
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 04:38:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:38:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:38:04 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:38:04 2011] Source does appear to be extended
[Wed Sep 28 04:38:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:38:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:38:25 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Wed Sep 28 04:38:25 2011] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.696
[Wed Sep 28 04:38:25 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.97"
[Wed Sep 28 04:38:26 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12.ximg exists
[Wed Sep 28 04:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12.csv
[Wed Sep 28 04:38:26 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Sep 28 04:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12.csv
[Wed Sep 28 04:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05844_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:38:26 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Sep 28 04:38:26 2011] fullrun_ccd3_acisf05844_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Sep 28 04:38:26 2011] Fit fullrun_ccd3_acisf05844_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Sep 28 04:38:37 2011] Spatial fit model total counts = 27.056900, observed total counts = 29.000000
[Wed Sep 28 04:38:37 2011] Offset between fit and detection position for source 20 = 0.235654 pixels
[Wed Sep 28 04:38:37 2011] 27.829920 total counts/ 4.872020 bgd. counts: snr = 10.401061
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.235654 pixels
  Position = (594.8, 790.5) = 14 21 43.13 53 8 52.4
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 23.0 +/- 5.3
  Background counts = 4.9
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 04:38:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:38:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:38:37 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:38:37 2011] Source does appear to be extended
[Wed Sep 28 04:38:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:47:50 2011] Not overwriting source region fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.reg
[Wed Sep 28 04:47:50 2011] Extracting stamp from image fullrun_ccd3_acisf05844_pi14-548_cl_sm2.00.img.gz, (551, 747) - (639, 834)
[Wed Sep 28 04:47:50 2011] Writing fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20.gif
[Wed Sep 28 04:49:31 2011] ../../acisf05844/products/events/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.evt and ../../acisf05844/products/events/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Sep 28 04:49:31 2011] Size of ../../acisf05844/products/events/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.evt.gz[events] = 29 counts
[Wed Sep 28 04:49:31 2011] Mean chipx,y = (643.28, 469.97)
[Wed Sep 28 04:49:31 2011] Mean tdetx,y = (4662.03, 3704.28)
[Wed Sep 28 04:49:31 2011] chipx,y range = (626.00-661.00, 451.00-486.00)
[Wed Sep 28 04:49:31 2011] Size of ../../acisf05844/products/events/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 32 counts
[Wed Sep 28 04:49:31 2011] ../../acisf05844/products/images/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.img and ../../acisf05844/products/images/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Sep 28 04:49:31 2011] Not generating rmf since there are only 22 counts
[Wed Sep 28 04:49:31 2011] arf not found, will run specextract
[Wed Sep 28 04:49:33 2011] ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_bkg.pi not found
[Wed Sep 28 04:49:33 2011] ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20.warf not found
[Wed Sep 28 04:49:33 2011] ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20.wrmf not found
[Wed Sep 28 04:49:33 2011] Removal of ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20.soff failed
[Wed Sep 28 04:49:33 2011] Failed to rename ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_grp.pi to ../../acisf05844/products/spectra/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.pi
[Wed Sep 28 04:49:39 2011] ../../acisf05844/products/lightcurves/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.lc and ../../acisf05844/products/lightcurves/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Sep 28 04:50:56 2011] No arf file found
[Wed Sep 28 04:51:09 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:51:09 2011] Error reading totcts from fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_src.pi
[Wed Sep 28 04:51:09 2011] No arf file for this source, not re-computing flux
[Wed Sep 28 04:51:15 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 04:51:16 2011] acisf05844/analysis//spectral/fullrun_ccd3_acisf05844_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete