[Sat Oct 15 06:12:01 2011] Detection parameters:
  Position = (514.5, 343.7) = 14 22 14.83 53 23 53.7
  Extent = 0.5" x 0.5", rotation angle = 143 degrees
  Source counts = 13.0 +/- 3.7
  Background counts = 1.0
  Rate = 0.0003 +/- 8e-05

[Sat Oct 15 06:12:02 2011] Off-axis axis estimate = 4.47'
[Sat Oct 15 06:12:59 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:12:59 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct 15 06:12:59 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Sat Oct 15 06:12:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.98"
[Sat Oct 15 06:13:00 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 15 06:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11.csv
[Sat Oct 15 06:13:00 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 15 06:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11.csv
[Sat Oct 15 06:13:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05841_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:13:00 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 15 06:13:00 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 15 06:13:00 2011] Fit fullrun_ccd2_acisf05841_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct 15 06:13:11 2011] Spatial fit model total counts = 18.998800, observed total counts = 19.000000
[Sat Oct 15 06:13:11 2011] Offset between fit and detection position for source 20 = 0.646955 pixels
[Sat Oct 15 06:13:11 2011] 19.107670 total counts/ 7.096670 bgd. counts: snr = 4.508705
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.646955 pixels
  Position = (515.1, 343.9) = 14 22 14.82 53 23 53.6
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.0 +/- 4.4
  Background counts = 7.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct 15 06:13:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:13:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:13:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:13:11 2011] Source does appear to be extended
[Sat Oct 15 06:13:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:13:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:13:34 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sat Oct 15 06:13:34 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.925
[Sat Oct 15 06:13:34 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.52"
[Sat Oct 15 06:13:35 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 15 06:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11.csv
[Sat Oct 15 06:13:35 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 15 06:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11.csv
[Sat Oct 15 06:13:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05841_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:13:36 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 15 06:13:36 2011] fullrun_ccd2_acisf05841_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 15 06:13:36 2011] Fit fullrun_ccd2_acisf05841_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 15 06:13:46 2011] Spatial fit model total counts = 18.862300, observed total counts = 19.000000
[Sat Oct 15 06:13:46 2011] Offset between fit and detection position for source 20 = 0.050754 pixels
[Sat Oct 15 06:13:46 2011] 18.546470 total counts/ 6.504270 bgd. counts: snr = 4.721789
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.050754 pixels
  Position = (515.2, 344.0) = 14 22 14.82 53 23 53.6
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.0 +/- 4.3
  Background counts = 6.5
  Rate = 0.0003 +/- 0.0001
[Sat Oct 15 06:13:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:13:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:13:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:13:46 2011] Source does appear to be extended
[Sat Oct 15 06:13:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:15:33 2011] Not overwriting source region fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.reg
[Sat Oct 15 06:15:33 2011] Extracting stamp from image fullrun_ccd2_acisf05841_pi14-548_cl_sm2.00.img.gz, (491, 320) - (540, 368)
[Sat Oct 15 06:15:33 2011] Writing fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20.gif
[Sat Oct 15 06:16:04 2011] ../../acisf05841/products/events/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.evt and ../../acisf05841/products/events/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Oct 15 06:16:04 2011] Size of ../../acisf05841/products/events/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.evt.gz[events] = 13 counts
[Sat Oct 15 06:16:04 2011] Mean chipx,y = (590.23, 926.08)
[Sat Oct 15 06:16:04 2011] Mean tdetx,y = (3987.08, 3495.77)
[Sat Oct 15 06:16:04 2011] chipx,y range = (575.00-604.00, 910.00-944.00)
[Sat Oct 15 06:16:05 2011] Size of ../../acisf05841/products/events/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 14 counts
[Sat Oct 15 06:16:05 2011] ../../acisf05841/products/images/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.img and ../../acisf05841/products/images/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Oct 15 06:16:05 2011] ../../acisf05841/products/spectra/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.pi and ../../acisf05841/products/spectra/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sat Oct 15 06:16:05 2011] Not generating rmf since there are only 12 counts
[Sat Oct 15 06:16:07 2011] ../../acisf05841/products/lightcurves/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.lc and ../../acisf05841/products/lightcurves/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Oct 15 06:16:37 2011] 186.064
[Sat Oct 15 06:18:07 2011] Updating aperture counts using extracted products
[Sat Oct 15 06:18:07 2011] Error reading totcts from fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_src.pi.gz
[Sat Oct 15 06:18:07 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:18:07 2011] Using photon index=1.80, rate=0.000271, arf fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20.arf
[Sat Oct 15 06:18:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:18:07 2011] Updating source flux to 3.3e-15
[Sat Oct 15 06:18:22 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 06:18:23 2011] acisf05841/analysis//spectral/fullrun_ccd2_acisf05841_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete