[Sat Oct 15 06:11:56 2011] Detection parameters:
  Position = (940.8, 805.3) = 14 22 34.15 53 33 14.1
  Extent = 1.6" x 1.2", rotation angle = 103 degrees
  Source counts = 197.0 +/- 14.6
  Background counts = 16.0
  Rate = 0.004 +/- 0.0003

[Sat Oct 15 06:11:58 2011] Off-axis axis estimate = 7.43'
[Sat Oct 15 06:12:57 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:12:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:12:57 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Sat Oct 15 06:12:57 2011] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.011
[Sat Oct 15 06:12:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.45"
[Sat Oct 15 06:12:57 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 06:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:12:58 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 06:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:12:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05841_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:12:58 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 06:12:58 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:12:58 2011] Fit fullrun_ccd0_acisf05841_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:13:07 2011] Spatial fit model total counts = 217.422000, observed total counts = 217.000000
[Sat Oct 15 06:13:07 2011] Offset between fit and detection position for source 1 = 0.776556 pixels
[Sat Oct 15 06:13:07 2011] 217.336800 total counts/ 17.301800 bgd. counts: snr = 48.090617
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.776556 pixels
  Position = (941.2, 806.0) = 14 22 34.15 53 33 14.2
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 200.0 +/- 14.7
  Background counts = 17.3
  Rate = 0.004 +/- 0.0003
[Sat Oct 15 06:13:07 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:13:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:13:07 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:13:07 2011] Source does appear to be extended
[Sat Oct 15 06:13:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:13:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:13:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:13:32 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Sat Oct 15 06:13:32 2011] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.953
[Sat Oct 15 06:13:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.27"
[Sat Oct 15 06:13:32 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 06:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:13:32 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 06:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:13:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05841_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:13:33 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 06:13:33 2011] fullrun_ccd0_acisf05841_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:13:33 2011] Fit fullrun_ccd0_acisf05841_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:13:42 2011] Spatial fit model total counts = 212.652000, observed total counts = 213.000000
[Sat Oct 15 06:13:42 2011] Offset between fit and detection position for source 1 = 0.256823 pixels
[Sat Oct 15 06:13:42 2011] 213.053970 total counts/ 9.273970 bgd. counts: snr = 66.915806
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.256823 pixels
  Position = (941.2, 805.7) = 14 22 34.15 53 33 14.1
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 203.8 +/- 14.6
  Background counts = 9.3
  Rate = 0.005 +/- 0.0003
[Sat Oct 15 06:13:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:13:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:13:42 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:13:42 2011] Source does appear to be extended
[Sat Oct 15 06:13:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:14:05 2011] Not overwriting source region fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 06:14:05 2011] Extracting stamp from image fullrun_ccd0_acisf05841_pi14-548_cl_sm2.00.img.gz, (835, 700) - (1047, 912)
[Sat Oct 15 06:14:05 2011] Writing fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 06:14:07 2011] ../../acisf05841/products/events/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.evt and ../../acisf05841/products/events/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 06:14:07 2011] Size of ../../acisf05841/products/events/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.evt.gz[events] = 212 counts
[Sat Oct 15 06:14:07 2011] Mean chipx,y = (623.21, 294.26)
[Sat Oct 15 06:14:07 2011] Mean tdetx,y = (3355.26, 4508.79)
[Sat Oct 15 06:14:07 2011] chipx,y range = (597.00-650.00, 270.00-318.00)
[Sat Oct 15 06:14:07 2011] Size of ../../acisf05841/products/events/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 140 counts
[Sat Oct 15 06:14:07 2011] ../../acisf05841/products/images/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.img and ../../acisf05841/products/images/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 06:14:07 2011] ../../acisf05841/products/spectra/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.pi and ../../acisf05841/products/spectra/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 06:14:09 2011] ../../acisf05841/products/lightcurves/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.lc and ../../acisf05841/products/lightcurves/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 06:14:49 2011] Keeping rmf generated by specextract
[Sat Oct 15 06:14:49 2011] 177.608
[Sat Oct 15 06:18:06 2011] Updating aperture counts using extracted products
[Sat Oct 15 06:18:06 2011] Error reading totcts from fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 06:18:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:18:06 2011] Using photon index=1.80, rate=0.00458, arf fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 06:18:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:18:06 2011] Updating source flux to 6e-14
[Sat Oct 15 06:18:18 2011] Reading fit data from acisf05841/analysis//spectral/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 06:18:18 2011] Spectral fit parameter nH value = 2.82096e+21
[Sat Oct 15 06:18:18 2011] Spectral fit parameter PhoIndex value = 2.37268
[Sat Oct 15 06:18:18 2011] Failed to get F(0.3-8.0) from acisf05841/analysis//spectral/fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 06:18:18 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:18:18 2011] Using Nh = 2.8e+21, photon index=2.37, rate=0.00458, arf fullrun_ccd0_acisf05841_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 06:18:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:18:18 2011] Updating source flux to 4.7e-14