[Mon Oct 24 05:08:48 2011] Detection parameters:
  Position = (485.6, 500.7) = 5 22 23.70 -36 25 22.3
  Extent = 0.5" x 0.5", rotation angle = 121 degrees
  Source counts = 186.7 +/- 13.7
  Background counts = 1.3
  Rate = 0.007 +/- 0.0005

[Mon Oct 24 05:08:50 2011] Off-axis axis estimate = 2.16'
[Mon Oct 24 05:09:34 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 05:09:34 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 24 05:09:34 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.132
[Mon Oct 24 05:09:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.45"
[Mon Oct 24 05:09:34 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 05:09:34 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 05:09:34 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 05:09:34 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 05:09:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05837_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 05:09:35 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 05:09:35 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 05:09:35 2011] Fit fullrun_ccd3_acisf05837_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 05:09:43 2011] Spatial fit model total counts = 188.624000, observed total counts = 188.000000
[Mon Oct 24 05:09:43 2011] Offset between fit and detection position for source 5 = 0.733061 pixels
[Mon Oct 24 05:09:43 2011] 188.907390 total counts/ 3.264390 bgd. counts: snr = 102.748989
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.733061 pixels
  Position = (486.0, 501.3) = 5 22 23.70 -36 25 22.3
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 185.6 +/- 13.7
  Background counts = 3.3
  Rate = 0.007 +/- 0.0005
[Mon Oct 24 05:09:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 05:09:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 05:09:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 05:09:43 2011] Source does appear to be extended
[Mon Oct 24 05:09:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 05:10:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 05:10:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 05:10:00 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Oct 24 05:10:00 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.012
[Mon Oct 24 05:10:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.60"
[Mon Oct 24 05:10:01 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 05:10:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 05:10:01 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 05:10:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 05:10:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05837_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 05:10:02 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 05:10:02 2011] fullrun_ccd3_acisf05837_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 05:10:02 2011] Fit fullrun_ccd3_acisf05837_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 05:10:09 2011] Spatial fit model total counts = 190.113000, observed total counts = 188.000000
[Mon Oct 24 05:10:09 2011] Offset between fit and detection position for source 5 = 0.016471 pixels
[Mon Oct 24 05:10:09 2011] 190.214760 total counts/ 2.707760 bgd. counts: snr = 113.949494
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.016471 pixels
  Position = (486.0, 501.3) = 5 22 23.70 -36 25 22.3
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 187.5 +/- 13.8
  Background counts = 2.7
  Rate = 0.007 +/- 0.0005
[Mon Oct 24 05:10:09 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 05:10:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 05:10:09 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 05:10:09 2011] Source does appear to be extended
[Mon Oct 24 05:10:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 05:12:04 2011] Not overwriting source region fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.reg
[Mon Oct 24 05:12:04 2011] Extracting stamp from image fullrun_ccd3_acisf05837_pi14-548_cl_sm2.00.img.gz, (458, 474) - (514, 529)
[Mon Oct 24 05:12:04 2011] Writing fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5.gif
[Mon Oct 24 05:12:06 2011] ../../acisf05837/products/events/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.evt and ../../acisf05837/products/events/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Oct 24 05:12:06 2011] Size of ../../acisf05837/products/events/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.evt.gz[events] = 188 counts
[Mon Oct 24 05:12:06 2011] Mean chipx,y = (464.40, 807.56)
[Mon Oct 24 05:12:06 2011] Mean tdetx,y = (4324.44, 3525.40)
[Mon Oct 24 05:12:06 2011] chipx,y range = (445.00-482.00, 789.00-827.00)
[Mon Oct 24 05:12:06 2011] Size of ../../acisf05837/products/events/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 9 counts
[Mon Oct 24 05:12:06 2011] ../../acisf05837/products/images/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.img and ../../acisf05837/products/images/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Oct 24 05:12:06 2011] ../../acisf05837/products/spectra/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.pi and ../../acisf05837/products/spectra/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Oct 24 05:12:08 2011] ../../acisf05837/products/lightcurves/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.lc and ../../acisf05837/products/lightcurves/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Oct 24 05:13:25 2011] Keeping rmf generated by specextract
[Mon Oct 24 05:13:25 2011] 196.657
[Mon Oct 24 05:13:32 2011] Updating aperture counts using extracted products
[Mon Oct 24 05:13:32 2011] Error reading totcts from fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Oct 24 05:13:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 05:13:33 2011] Using photon index=1.80, rate=0.00677, arf fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5.arf
[Mon Oct 24 05:13:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 05:13:33 2011] Updating source flux to 7.9e-14
[Mon Oct 24 05:13:45 2011] Reading fit data from acisf05837/analysis//spectral/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_pl.csv
[Mon Oct 24 05:13:45 2011] Spectral fit parameter nH value = 2.90331e+15
[Mon Oct 24 05:13:45 2011] Spectral fit parameter PhoIndex value = 1.88355
[Mon Oct 24 05:13:45 2011] Failed to get F(0.3-8.0) from acisf05837/analysis//spectral/fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 05:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 05:13:45 2011] Using Nh = 2.9e+15, photon index=1.88, rate=0.00677, arf fullrun_ccd3_acisf05837_pi14-548_pass1_cl_src5.arf
[Mon Oct 24 05:13:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 05:13:45 2011] Updating source flux to 8.1e-14