[Tue Sep 27 08:37:39 2011] Detection parameters:
  Position = (487.0, 953.9) = 11 17 23.35 17 54 50.9
  Extent = 1.8" x 1.3", rotation angle = 127 degrees
  Source counts = 213.8 +/- 15.0
  Background counts = 12.2
  Rate = 0.005 +/- 0.0003

[Tue Sep 27 08:37:41 2011] Off-axis axis estimate = 6.97'
[Tue Sep 27 08:38:48 2011] Using EEF radius (= 2.16 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 08:38:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 08:38:48 2011] Initial guess for spatial extent in simple fitting = 2.16"
[Tue Sep 27 08:38:48 2011] source mask rpix=4.4, npix_max = 95, mask sum = 100, frac = 1.046
[Tue Sep 27 08:38:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.16"
[Tue Sep 27 08:38:48 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 08:38:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 08:38:48 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 08:38:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 08:38:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05836_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 08:38:49 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 08:38:49 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 08:38:49 2011] Fit fullrun_ccd2_acisf05836_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 08:39:02 2011] Spatial fit model total counts = 231.992000, observed total counts = 232.000000
[Tue Sep 27 08:39:02 2011] Offset between fit and detection position for source 2 = 0.974267 pixels
[Tue Sep 27 08:39:02 2011] 231.384400 total counts/ 24.631400 bgd. counts: snr = 41.658849
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.974267 pixels
  Position = (487.5, 954.7) = 11 17 23.35 17 54 51.0
  Extent = 1.8 (1.7-2.1)", rotation angle = 0
  Source counts = 206.8 +/- 15.2
  Background counts = 24.6
  Rate = 0.005 +/- 0.0003
[Tue Sep 27 08:39:02 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 08:39:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 08:39:02 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 08:39:02 2011] Source does appear to be extended
[Tue Sep 27 08:39:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 08:39:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 08:39:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 08:39:31 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Tue Sep 27 08:39:31 2011] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.018
[Tue Sep 27 08:39:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.82"
[Tue Sep 27 08:39:33 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 08:39:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 08:39:33 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 08:39:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 08:39:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05836_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 08:39:33 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 08:39:33 2011] fullrun_ccd2_acisf05836_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 08:39:33 2011] Fit fullrun_ccd2_acisf05836_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 08:39:47 2011] Spatial fit model total counts = 226.331000, observed total counts = 228.000000
[Tue Sep 27 08:39:47 2011] Offset between fit and detection position for source 2 = 0.105985 pixels
[Tue Sep 27 08:39:47 2011] 225.312600 total counts/ 25.028600 bgd. counts: snr = 40.033907
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.105985 pixels
  Position = (487.5, 954.9) = 11 17 23.35 17 54 51.1
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 200.3 +/- 15.0
  Background counts = 25.0
  Rate = 0.004 +/- 0.0003
[Tue Sep 27 08:39:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 08:39:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 08:39:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 08:39:47 2011] Source does appear to be extended
[Tue Sep 27 08:39:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 08:43:21 2011] Not overwriting source region fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.reg
[Tue Sep 27 08:43:21 2011] Extracting stamp from image fullrun_ccd2_acisf05836_pi14-548_cl_sm2.00.img.gz, (406, 873) - (569, 1036)
[Tue Sep 27 08:43:21 2011] Writing fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2.gif
[Tue Sep 27 08:43:22 2011] ../../acisf05836/products/events/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.evt and ../../acisf05836/products/events/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Sep 27 08:43:22 2011] Size of ../../acisf05836/products/events/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.evt.gz[events] = 223 counts
[Tue Sep 27 08:43:22 2011] Mean chipx,y = (313.05, 216.35)
[Tue Sep 27 08:43:22 2011] Mean tdetx,y = (3277.35, 3772.95)
[Tue Sep 27 08:43:22 2011] chipx,y range = (288.00-337.00, 191.00-242.00)
[Tue Sep 27 08:43:22 2011] Size of ../../acisf05836/products/events/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 73 counts
[Tue Sep 27 08:43:22 2011] ../../acisf05836/products/images/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.img and ../../acisf05836/products/images/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Sep 27 08:43:22 2011] ../../acisf05836/products/spectra/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.pi and ../../acisf05836/products/spectra/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Sep 27 08:43:28 2011] ../../acisf05836/products/lightcurves/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.lc and ../../acisf05836/products/lightcurves/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Sep 27 08:45:24 2011] Keeping rmf generated by specextract
[Tue Sep 27 08:45:24 2011] 180.632
[Tue Sep 27 08:48:20 2011] Updating aperture counts using extracted products
[Tue Sep 27 08:48:20 2011] Error reading totcts from fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Sep 27 08:48:21 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 08:48:21 2011] Using photon index=1.80, rate=0.00444, arf fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 08:48:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 08:48:21 2011] Updating source flux to 5.6e-14
[Tue Sep 27 08:48:48 2011] Reading fit data from acisf05836/analysis//spectral/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_pl.csv
[Tue Sep 27 08:48:48 2011] Spectral fit parameter nH value = 7.06868e+13
[Tue Sep 27 08:48:48 2011] Spectral fit parameter PhoIndex value = 1.32036
[Tue Sep 27 08:48:48 2011] Failed to get F(0.3-8.0) from acisf05836/analysis//spectral/fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 08:48:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 08:48:48 2011] Using Nh = 7.1e+13, photon index=1.32, rate=0.00444, arf fullrun_ccd2_acisf05836_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 08:48:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 08:48:48 2011] Updating source flux to 6.5e-14