[Sun Oct 30 00:53:42 2011] Detection parameters:
  Position = (252.2, 865.3) = 12 30 48.22 12 23 35.3
  Extent = 0.9" x 0.8", rotation angle = 28 degrees
  Source counts = 688.9 +/- 40.9
  Background counts = 982.1
  Rate = 0.02 +/- 0.001

[Sun Oct 30 00:53:45 2011] Off-axis axis estimate = 0.94'
[Sun Oct 30 00:58:35 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:58:35 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 00:58:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Sun Oct 30 00:58:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Sun Oct 30 00:58:36 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 00:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 00:58:36 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 00:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 00:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 00:58:38 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 00:58:52 2011] Spatial fit model total counts = 2745.260000, observed total counts = 2738.000000
[Sun Oct 30 00:58:52 2011] Offset between fit and detection position for source 6 = 0.530871 pixels
[Sun Oct 30 00:58:52 2011] 2663.318000 total counts/ 2280.040000 bgd. counts: snr = 8.026804
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.530871 pixels
  Position = (252.7, 865.4) = 12 30 48.22 12 23 35.1
  Extent = 0.7 (0.7-0.9)", rotation angle = 0
  Source counts = 383.3 +/- 51.6
  Background counts = 2280.0
  Rate = 0.01 +/- 0.002
[Sun Oct 30 00:58:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:58:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:58:52 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:58:52 2011] Source does appear to be extended
[Sun Oct 30 00:58:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 00:59:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:59:07 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sun Oct 30 00:59:07 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.977
[Sun Oct 30 00:59:07 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.75"
[Sun Oct 30 00:59:07 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 00:59:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 00:59:07 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 00:59:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 00:59:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 00:59:08 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 00:59:19 2011] Spatial fit model total counts = 2485.320000, observed total counts = 2474.000000
[Sun Oct 30 00:59:19 2011] Offset between fit and detection position for source 6 = 0.101756 pixels
[Sun Oct 30 00:59:19 2011] 2436.553000 total counts/ 2016.440000 bgd. counts: snr = 9.355639
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.101756 pixels
  Position = (252.6, 865.4) = 12 30 48.22 12 23 35.1
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 420.1 +/- 49.4
  Background counts = 2016.4
  Rate = 0.01 +/- 0.001
[Sun Oct 30 00:59:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:59:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:59:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:59:19 2011] Source does appear to be extended
[Sun Oct 30 00:59:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 01:00:39 2011] Not overwriting source region fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 30 01:00:39 2011] Extracting stamp from image fullrun_ccd3_acisf05828_pi14-548_cl_sm2.00.img.gz, (216, 829) - (289, 902)
[Sun Oct 30 01:00:39 2011] Writing fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6.gif
[Sun Oct 30 01:00:43 2011] ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.evt and ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 30 01:00:44 2011] Size of ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.evt.gz[events] = 1449 counts
[Sun Oct 30 01:00:44 2011] Mean chipx,y = (823.21, 905.94)
[Sun Oct 30 01:00:44 2011] Mean tdetx,y = (4226.06, 3884.21)
[Sun Oct 30 01:00:44 2011] chipx,y range = (800.00-846.00, 883.00-928.00)
[Sun Oct 30 01:00:44 2011] Size of ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 3130 counts
[Sun Oct 30 01:00:44 2011] ../../acisf05828/products/images/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.img and ../../acisf05828/products/images/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 30 01:00:44 2011] ../../acisf05828/products/spectra/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.pi and ../../acisf05828/products/spectra/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 30 01:00:46 2011] ../../acisf05828/products/lightcurves/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.lc and ../../acisf05828/products/lightcurves/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 30 01:01:38 2011] Keeping rmf generated by specextract
[Sun Oct 30 01:01:38 2011] 202.434
[Sun Oct 30 01:01:41 2011] Updating aperture counts using extracted products
[Sun Oct 30 01:01:41 2011] Error reading totcts from fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 30 01:01:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 01:01:41 2011] Using photon index=1.80, rate=0.0127, arf fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src6.arf
[Sun Oct 30 01:01:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 01:01:41 2011] Updating source flux to 1.4e-13