[Sun Oct 30 00:53:44 2011] Detection parameters:
  Position = (471.3, 672.8) = 12 30 40.87 12 22 0.6
  Extent = 0.6" x 0.5", rotation angle = 133 degrees
  Source counts = 19.9 +/- 6.4
  Background counts = 21.1
  Rate = 0.0006 +/- 0.0002

[Sun Oct 30 00:53:45 2011] Off-axis axis estimate = 3.31'
[Sun Oct 30 00:58:35 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:58:35 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Oct 30 00:58:35 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.213
[Sun Oct 30 00:58:35 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 0.65"
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47.csv
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47_1.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47.csv
[Sun Oct 30 00:58:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Oct 30 00:58:38 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Oct 30 00:58:52 2011] Spatial fit model total counts = 229.994000, observed total counts = 230.000000
[Sun Oct 30 00:58:52 2011] Offset between fit and detection position for source 39 = 0.265134 pixels
[Sun Oct 30 00:58:52 2011] 227.292700 total counts/ 212.198000 bgd. counts: snr = 1.036224
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.265134 pixels
  Position = (471.5, 672.9) = 12 30 40.88 12 22 0.4
  Extent = 0.4 (0.2-0.7)", rotation angle = 0
  Source counts = 15.1 +/- 15.1
  Background counts = 212.2
  Rate = 0.0005 +/- 0.0005
  Deleting source due to low Poisson probability