[Sun Oct 30 00:53:44 2011] Detection parameters:
  Position = (264.5, 837.2) = 12 30 47.81 12 23 21.5
  Extent = 0.5" x 0.5", rotation angle = 37 degrees
  Source counts = 60.0 +/- 17.9
  Background counts = 259.0
  Rate = 0.002 +/- 0.0005

[Sun Oct 30 00:53:45 2011] Off-axis axis estimate = 1.15'
[Sun Oct 30 00:58:35 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:58:35 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 00:58:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Sun Oct 30 00:58:35 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.38"
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26.csv
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26.csv
[Sun Oct 30 00:58:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Oct 30 00:58:38 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Oct 30 00:58:52 2011] Spatial fit model total counts = 1477.650000, observed total counts = 1469.000000
[Sun Oct 30 00:58:52 2011] Offset between fit and detection position for source 29 = 4.728309 pixels
[Sun Oct 30 00:58:52 2011] 1445.986000 total counts/ 1308.700000 bgd. counts: snr = 3.794951
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.728309 pixels
  Position = (267.1, 841.1) = 12 30 47.74 12 23 23.2
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 137.3 +/- 38.0
  Background counts = 1308.7
  Rate = 0.004 +/- 0.001
[Sun Oct 30 00:58:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:58:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:58:52 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:58:52 2011] Source does appear to be extended
[Sun Oct 30 00:58:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 00:59:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:59:07 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Sun Oct 30 00:59:07 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.989
[Sun Oct 30 00:59:07 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 1.49"
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21.ximg exists
[Sun Oct 30 00:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21.csv
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Oct 30 00:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21.csv
[Sun Oct 30 00:59:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Oct 30 00:59:08 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Oct 30 00:59:08 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Oct 30 00:59:19 2011] Spatial fit model total counts = 1689.000000, observed total counts = 1689.000000
[Sun Oct 30 00:59:19 2011] Offset between fit and detection position for source 29 = 4.491717 pixels
[Sun Oct 30 00:59:19 2011] 1676.527000 total counts/ 1275.160000 bgd. counts: snr = 11.239819
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.491717 pixels
  Position = (269.5, 837.3) = 12 30 47.66 12 23 21.3
  Extent = 3.0 (1.2-5.9)", rotation angle = 0
  Source counts = 401.4 +/- 40.9
  Background counts = 1275.2
  Rate = 0.01 +/- 0.001
[Sun Oct 30 00:59:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:59:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:59:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:59:19 2011] Source does appear to be extended
[Sun Oct 30 00:59:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 01:00:40 2011] Not overwriting source region fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.reg
[Sun Oct 30 01:00:40 2011] Extracting stamp from image fullrun_ccd3_acisf05828_pi14-548_cl_sm2.00.img.gz, (134, 701) - (405, 973)
[Sun Oct 30 01:00:40 2011] Writing fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29.gif
[Sun Oct 30 01:01:30 2011] ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.evt and ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun Oct 30 01:01:30 2011] Size of ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.evt.gz[events] = 8661 counts
[Sun Oct 30 01:01:30 2011] Mean chipx,y = (825.96, 874.65)
[Sun Oct 30 01:01:30 2011] Mean tdetx,y = (4257.35, 3886.96)
[Sun Oct 30 01:01:30 2011] chipx,y range = (784.00-867.00, 833.00-914.00)
[Sun Oct 30 01:01:30 2011] Size of ../../acisf05828/products/events/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 48084 counts
[Sun Oct 30 01:01:30 2011] ../../acisf05828/products/images/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.img and ../../acisf05828/products/images/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun Oct 30 01:01:30 2011] ../../acisf05828/products/spectra/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.pi and ../../acisf05828/products/spectra/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun Oct 30 01:01:33 2011] ../../acisf05828/products/lightcurves/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.lc and ../../acisf05828/products/lightcurves/fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun Oct 30 01:01:38 2011] Keeping rmf generated by specextract
[Sun Oct 30 01:01:38 2011] 202.126
[Sun Oct 30 01:01:41 2011] Updating aperture counts using extracted products
[Sun Oct 30 01:01:41 2011] Error reading totcts from fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29_src.pi.gz
[Sun Oct 30 01:01:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 01:01:41 2011] Using photon index=1.80, rate=0.0122, arf fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src29.arf
[Sun Oct 30 01:01:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 01:01:41 2011] Updating source flux to 1.4e-13