[Sun Oct 30 00:53:44 2011] Detection parameters:
  Position = (197.2, 808.7) = 12 30 50.07 12 23 7.5
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 48.3 +/- 16.2
  Background counts = 212.7
  Rate = 0.001 +/- 0.0005

[Sun Oct 30 00:53:45 2011] Off-axis axis estimate = 0.98'
[Sun Oct 30 00:58:35 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:58:35 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 00:58:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Sun Oct 30 00:58:35 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.38"
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30.csv
[Sun Oct 30 00:58:37 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30_1.ximg exists
[Sun Oct 30 00:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30.csv
[Sun Oct 30 00:58:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05828_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Sun Oct 30 00:58:38 2011] fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Oct 30 00:58:38 2011] Fit fullrun_ccd3_acisf05828_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Oct 30 00:58:52 2011] Spatial fit model total counts = 1267.000000, observed total counts = 1267.000000
[Sun Oct 30 00:58:52 2011] Offset between fit and detection position for source 28 = 1.206498 pixels
[Sun Oct 30 00:58:52 2011] 1284.866600 total counts/ 1269.630000 bgd. counts: snr = 0.427612
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.206498 pixels
  Position = (196.5, 809.6) = 12 30 50.11 12 23 7.7
  Extent = 0.3 (0.1-0.5)", rotation angle = 0
  Source counts = 15.2 +/- 35.8
  Background counts = 1269.6
  Rate = 0.0005 +/- 0.001
  Deleting source due to low Poisson probability