[Sun Oct 30 00:53:39 2011] Detection parameters: Position = (1274.6, 679.7) = 12 31 1.88 12 24 12.9 Extent = 0.5" x 0.5", rotation angle = 71 degrees Source counts = 15.9 +/- 6.7 Background counts = 29.1 Rate = 0.0005 +/- 0.0002 [Sun Oct 30 00:53:39 2011] Off-axis axis estimate = 2.51' [Sun Oct 30 00:58:32 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting [Sun Oct 30 00:58:32 2011] Initial guess for spatial extent in simple fitting = 0.49" [Sun Oct 30 00:58:32 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994 [Sun Oct 30 00:58:32 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.49" [Sun Oct 30 00:58:33 2011] fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3.ximg exists [Sun Oct 30 00:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3.csv [Sun Oct 30 00:58:33 2011] fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3_1.ximg exists [Sun Oct 30 00:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3.csv [Sun Oct 30 00:58:33 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf05828_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 30 00:58:33 2011] fullrun_ccd0_acisf05828_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Sun Oct 30 00:58:33 2011] fullrun_ccd0_acisf05828_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Sun Oct 30 00:58:33 2011] Fit fullrun_ccd0_acisf05828_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Sun Oct 30 00:58:41 2011] Spatial fit model total counts = 193.438000, observed total counts = 188.000000 [Sun Oct 30 00:58:41 2011] Offset between fit and detection position for source 7 = 2.713526 pixels [Sun Oct 30 00:58:41 2011] 196.610870 total counts/ 189.036000 bgd. counts: snr = 0.550938 Spatial fit parameters: Offset between fit and detection position for source 7 = 2.713526 pixels Position = (1276.9, 681.2) = 12 31 1.82 12 24 13.4 Extent = 0.6 (0.1-1.5)", rotation angle = 0 Source counts = 7.6 +/- 14.0 Background counts = 189.0 Rate = 0.0002 +/- 0.0004 Deleting source due to low Poisson probability