skip = 
machinename wfxt.pha.jhu.edu process id = 25923: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src8_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 1.522e-14
Count rates:  0.004283
Entry point parameter values:
Nh = 9.94e-15 ()
Gamma = 2.35 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src8_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 2.15e-15 (0 - 0.309)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 2.47 (1.96 - 3.85)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src8_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 13.405(14)
F(0.5-2.0 keV) = 2.465e-14
F(2.0-10.0 keV) = 1.421e-14
F(0.3-8.0) =  5.151e-14
Count rates:  0.004283
skip = 
machinename xassist.localdomain process id = 31451: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src8_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 1.437e-14
Count rates:  0.004283
Entry point parameter values:
Nh = 1.19e-07 ()
Gamma = 2.45 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 1.19e-07 (0 - 0.31)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 2.45 (1.96 - 3.07)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src8_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 13.418(14)
F(0.5-2.0 keV) = 2.429e-14
F(2.0-10.0 keV) = 1.437e-14
F(0.3-8.0) =  5.085e-14
Count rates:  0.004283