skip = 
machinename wfxt.pha.jhu.edu process id = 26152: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 9.324e-16
Count rates:  0.0123
Entry point parameter values:
Nh = 1.31 ()
Gamma = 9.5 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Nh = 1.21 (0.835 - 1.35)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Nh = 1.27 (1.14 - 1.42)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
Gamma = 9.94 (7.65 - 10)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 113.485(91)
F(0.5-2.0 keV) = 6.026e-14
F(2.0-10.0 keV) = 5.769e-16
F(0.3-8.0) =  6.615e-14
Count rates:  0.0123
skip = 
machinename xassist.localdomain process id = 5960: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 7.128e-16
Count rates:  0.0123
Entry point parameter values:
Nh = 1.2 ()
Gamma = 9.5 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
Nh = 1.2 (0.84 - 1.34)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Lower steppar contains at least one rel. min.
Nh = 1.27 (1.14 - 1.42)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
Gamma = 9.98 (7.66 - 10)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src20_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 113.420(91)
F(0.5-2.0 keV) = 6.027e-14
F(2.0-10.0 keV) = 5.66e-16
F(0.3-8.0) =  6.617e-14
Count rates:  0.0123