skip = 
machinename wfxt.pha.jhu.edu process id = 25602: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src1_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 3.291e-12
Count rates:  0.3466
Entry point parameter values:
Nh = 3.87e-22 ()
Gamma = 1.41 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 3.87e-22 (0 - 0.00352)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 1.41 (1.37 - 1.46)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src1_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 1007.840(396)
F(0.5-2.0 keV) = 1.166e-12
F(2.0-10.0 keV) = 3.291e-12
F(0.3-8.0) =  4.037e-12
Count rates:  0.3466
skip = 
machinename xassist.localdomain process id = 7983: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src1_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 3.365e-12
Count rates:  0.3466
Entry point parameter values:
Nh = 4.57e-08 ()
Gamma = 1.38 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src1_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 4.57e-08 (0 - 0.0035)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 1.41 (1.37 - 1.46)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src1_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 1007.820(396)
F(0.5-2.0 keV) = 1.168e-12
F(2.0-10.0 keV) = 3.295e-12
F(0.3-8.0) =  4.044e-12
Count rates:  0.3466