skip = 
machinename wfxt.pha.jhu.edu process id = 25507: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src14_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 3.712e-12
Count rates:  0.2863
Entry point parameter values:
Nh = 2.4e-26 ()
Gamma = 0.999 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
A new minimum was found, saved all as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src14_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 1.12e-26 (0 - 0.00436)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 1.2 (1.15 - 1.25)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src14_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 854.625(382)
F(0.5-2.0 keV) = 8.731e-13
F(2.0-10.0 keV) = 3.413e-12
F(0.3-8.0) =  3.662e-12
Count rates:  0.2863
skip = 
machinename xassist.localdomain process id = 22858: smart_fit pl logroot=fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src14_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 3.413e-12
Count rates:  0.2863
Entry point parameter values:
Nh = 1.72e-09 ()
Gamma = 1.2 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
Hard limit reached before req. deltachisq for lower bound
Nh = 1.72e-09 (0 - 0.00436)
Getting error on parameter #3 = Gamma
smart_error exited normally
Gamma = 1.2 (1.15 - 1.25)
Saving fit as fullrun_ccd3_acisf05828_pi14-548_pass1_cl_src14_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 854.625(382)
F(0.5-2.0 keV) = 8.731e-13
F(2.0-10.0 keV) = 3.413e-12
F(0.3-8.0) =  3.662e-12
Count rates:  0.2863