[Sun Sep 25 05:27:39 2011] Detection parameters:
  Position = (931.1, 736.7) = 12 31 0.36 12 24 17.5
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 216.2 +/- 21.2
  Background counts = 231.8
  Rate = 0.001 +/- 0.0001

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 3.48'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Sep 25 05:51:45 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.109
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 0.69"
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55.csv
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55_1.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55.csv
[Sun Sep 25 05:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Sep 25 05:51:56 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 1044.850000, observed total counts = 1045.000000
[Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 75 = 0.672222 pixels
[Sun Sep 25 05:52:48 2011] 1043.897000 total counts/ 828.809000 bgd. counts: snr = 7.471176
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.672222 pixels
  Position = (931.4, 737.3) = 12 31 0.37 12 24 17.5
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 215.1 +/- 32.3
  Background counts = 828.8
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Sep 25 05:53:34 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.926
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 0.52"
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50.csv
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50_1.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50.csv
[Sun Sep 25 05:53:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:43 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Sun Sep 25 05:53:43 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Sun Sep 25 05:53:43 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 1050.000000, observed total counts = 1050.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 75 = 0.012547 pixels
[Sun Sep 25 05:54:24 2011] 1051.602000 total counts/ 839.891000 bgd. counts: snr = 7.305197
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.012547 pixels
  Position = (931.3, 737.3) = 12 31 0.37 12 24 17.5
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 211.7 +/- 32.4
  Background counts = 839.9
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:02:26 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.reg
[Sun Sep 25 06:02:26 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (908, 714) - (955, 761)
[Sun Sep 25 06:02:26 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75.gif
[Sun Sep 25 06:05:34 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_bgd.evt exist, delete to re-create
[Sun Sep 25 06:05:34 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.evt.gz[events] = 399 counts
[Sun Sep 25 06:05:34 2011] Mean chipx,y = (675.59, 636.45)
[Sun Sep 25 06:05:34 2011] Mean tdetx,y = (4495.55, 3736.59)
[Sun Sep 25 06:05:34 2011] chipx,y range = (656.00-695.00, 618.00-656.00)
[Sun Sep 25 06:05:34 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_bgd.evt.gz[events] = 2210 counts
[Sun Sep 25 06:05:34 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_bgd.img exist, delete to re-create
[Sun Sep 25 06:05:34 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_bgd.pi exist, delete to re-create
[Sun Sep 25 06:05:38 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:02 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:02 2011] 192.964
[Sun Sep 25 06:09:22 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:22 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75_src.pi.gz
[Sun Sep 25 06:09:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:26 2011] Using photon index=1.80, rate=0.00136, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src75.arf
[Sun Sep 25 06:09:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:26 2011] Updating source flux to 1.6e-14