[Sun Sep 25 05:27:37 2011] Detection parameters:
  Position = (1200.6, 707.4) = 12 30 51.31 12 24 3.1
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 175.3 +/- 33.9
  Background counts = 975.7
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 1.49'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.338
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 66 for pass 0, mean size = 0.39"
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66.csv
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66_1.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66.csv
[Sun Sep 25 05:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src66.ximg exists
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src66_1.ximg exists
[Sun Sep 25 05:51:56 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src66 appears to have run properly
[Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 3554.980000, observed total counts = 3555.000000
[Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 69 = 1.843543 pixels
[Sun Sep 25 05:52:48 2011] 3547.887000 total counts/ 3414.120000 bgd. counts: snr = 2.289336
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 1.843543 pixels
  Position = (1202.4, 706.9) = 12 30 51.27 12 24 2.6
  Extent = 0.8 (0.4-1.3)", rotation angle = 0
  Source counts = 133.8 +/- 59.6
  Background counts = 3414.1
  Rate = 0.0009 +/- 0.0004
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sun Sep 25 05:53:34 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 0.76"
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60.csv
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60_1.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60.csv
[Sun Sep 25 05:53:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:44 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Sun Sep 25 05:53:44 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Sun Sep 25 05:53:44 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src60 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 3546.000000, observed total counts = 3546.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 69 = 0.232450 pixels
[Sun Sep 25 05:54:24 2011] 3537.932000 total counts/ 3368.310000 bgd. counts: snr = 2.922646
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.232450 pixels
  Position = (1202.2, 707.0) = 12 30 51.27 12 24 2.6
  Extent = 0.9 (0.5-1.5)", rotation angle = 0
  Source counts = 169.6 +/- 59.5
  Background counts = 3368.3
  Rate = 0.001 +/- 0.0004
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:02:26 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.reg
[Sun Sep 25 06:02:26 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (1162, 666) - (1243, 747)
[Sun Sep 25 06:02:26 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69.gif
[Sun Sep 25 06:06:10 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_bgd.evt exist, delete to re-create
[Sun Sep 25 06:06:10 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.evt.gz[events] = 2391 counts
[Sun Sep 25 06:06:10 2011] Mean chipx,y = (868.63, 831.01)
[Sun Sep 25 06:06:10 2011] Mean tdetx,y = (4300.99, 3929.63)
[Sun Sep 25 06:06:10 2011] chipx,y range = (845.00-892.00, 807.00-853.00)
[Sun Sep 25 06:06:10 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_bgd.evt.gz[events] = 25635 counts
[Sun Sep 25 06:06:10 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_bgd.img exist, delete to re-create
[Sun Sep 25 06:06:10 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_bgd.pi exist, delete to re-create
[Sun Sep 25 06:06:13 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:03 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:03 2011] 202.133
[Sun Sep 25 06:09:22 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:22 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69_src.pi.gz
[Sun Sep 25 06:09:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:26 2011] Using photon index=1.80, rate=0.00109, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src69.arf
[Sun Sep 25 06:09:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:26 2011] Updating source flux to 1.2e-14